String serving and then some!

vixenmaster · Post by **vixenmaster** » Sat Mar 16, 2013 7:19 pm

Sounds great congrats on the reservin & new servin & maken strings!

mr meat · Post by **mr meat** » Sat Mar 16, 2013 9:06 pm

string looks good congrats!!

Hoagy · Post by **Hoagy** » Sat Mar 16, 2013 9:13 pm

Hey xcalibur, Good for you on your new strings. "Movin on up". Enjoy yourself.
Hoagy

yooper_man · Post by **yooper_man** » Sat Mar 16, 2013 9:20 pm

xcaliber,

Very professional job, I like the colors.

Andrew

Tennessee Tom · Post by **Tennessee Tom** » Sun Mar 17, 2013 9:49 am

Congradulations on building a very good looking string , I also like the three bundle , quite abit harder to build but a lot better looking , I followed the same path videos many failed attempts , but like to do my own fixings so when I need repair I can do it myself , I build from dacron to practice with on my max and other BCY materials for the nox that I hunt with !

Deerstalker · Post by **Deerstalker** » Sun Mar 17, 2013 12:02 pm

Can you post a picture of your string rig? Thanks

Xbowkiller · Post by **Xbowkiller** » Sun Mar 17, 2013 4:31 pm

Good looking string. I would like to try building one someday.

yooper_man · Post by **yooper_man** » Sun Mar 17, 2013 5:11 pm

xcaliber wrote:Here is the jig. The black, and yellow table is something I bought. The rail for the jig is electrical strut that I picked up at Menards, and the hooks are 3/8" X 7". I welded the two brackets up out of 1/4" plate, and made four 3/8" thick steel inserts that fit slide in the electrical strut, but fit relatively tight side, to side. I drilled ,and tapped them to take a 1/2" bolt, two bolts per end bracket.
Here are the pictures, I hope all three come out.

Dan
http://i1339.photobucket.com/albums/o71 ... abb3c2.jpg
http://i1339.photobucket.com/albums/o71 ... 17a6dc.jpg
http://i1339.photobucket.com/albums/o71 ... 38755e.jpg

xcaliber wrote:
xcaliber,

I hope this helps your pics.

Andrew

mattdawg120 · Post by **mattdawg120** » Tue Mar 19, 2013 2:56 pm

Hello there xcalibur, I'm new to the forum and seen your post nd pictures of the strings you've made for you're xbow. I would like to know if you can make a couple for my new Equinox I just got a couple weeks ago. Please let me know if you can, I would like one green/black and orange/black. You can e-mail me the information.

TheTinker · Post by **TheTinker** » Tue Mar 19, 2013 6:00 pm

Lookin Good -way to go!

j.krug · Post by **j.krug** » Tue Mar 19, 2013 7:36 pm

Some nice looking strings there!

mattdawg120 · Post by **mattdawg120** » Mon Mar 25, 2013 5:04 pm

Hey Xcalibur, Im not sure but it says Im not allowed to view the messages you send me. Im not sure how to get authorization to do that. I f you can, send your response to my email...

Oppie · Post by **Oppie** » Sat Mar 30, 2013 7:23 pm

Got one of xcaliber's green & black strings on the Exocet, great shootin string for sure! Poked three bolts thru a water bottle from 30yd today

Excalibur Crossbow Forum

String serving and then some!

Re: String serving and then some!

Re: String serving and then some!

Re: String serving and then some!

Re: String serving and then some!

Re: String serving and then some!

Re: String serving and then some!

Re: String serving and then some!

Re: String serving and then some!

Re: String serving and then some!

Re: String serving and then some!

Re: String serving and then some!

Re: String serving and then some!

Re: String serving and then some!