BOLT/ ARROW CASE .....

[ShooterJohn]

What are your favourite cases for carrying extra arrows in? Either to store extras or take them to a lodge or camp when hunting.
I see plano makes a few different ones. Any suggestions?


Thanks.

[Dash]

I use an MTM bolt case. Not too expensive and its held up well for me.
My second MTM case loaded with my best competition bolts flew out of the back of the ute never to be seen again

[hockeyfodder]

My second MTM case loaded with my best competition bolts flew out of the back of the ute never to be seen again [/quote]
Oh man that really hurts!

[vixenmaster]

I ordered 2 of the MTM crossbow Bolt cases from Gander MTN. they were on clearance fer $14.99 each. They hold a dz. arrows & i doubt i will need more than half dz of them at one time

[DaGriz]

I make my arrow cases from PVC pipe. Cut 6" or 8" diameter PVC pipe to whatever length you want, glue a cap on one end, use second cap for the top. You can make a divider from a piece of thin plywood and drill 12 holes for arrows to slip through place in about 3 inches down from the open end. Works great and is shock proof, plus doesn't cost much at all to make.

[Normous]

Another vote MTM, I keep some allen wrenches and a spare string in there too.

[TheTinker]

I make my arrow cases from PVC pipe. Cut 6" or 8" diameter PVC pipe to whatever length you want, glue a cap on one end, use second cap for the top. You can make a divider from a piece of thin plywood and drill 12 holes for arrows to slip through place in about 3 inches down from the open end. Works great and is shock proof, plus doesn't cost much at all to make.

Griz; Innovative idea -I admire the 'do-it-yourselfers'!
I think I'm gonna try it.
As I digest this, I have to wonder if in your PVC pipe, instead of a plywood separator, you had pieces of the foam small-pipe insulating sleeves cut 3 inches short of the 'top' and the PVC pipe packed snugly full of them. No Abrasion..
[http://www.homedepot.com/p/t/100665767? ... =100665767]
"Just thinkin" - Thanks-Tink

[j.krug]

I use the MTM arrow case as well. Works like a charm.

[farmlife1]

I use the MTM as well. I do use a PVC "quiver" to keep my target ammo in. The MTM is fairly cheap and works just fine.

[Carnivorous]

Another vote MTM, I keep some allen wrenches and a spare string in there too.

MTM case all the way!

[2Bowsman]

I use the MTM case also

[Onetimeonly x-->]

MTM case for me also. Added double sided tape to the bottom of the foam. Keeps the foam secure.
Scott

[Dereck]

cardboard shipping tube with removable ends works great

[j.krug]

MTM case for me also. Added double sided tape to the bottom of the foam. Keeps the foam secure.
Scott

I used a bit of Shoe Goo to hold mine in.

[Jeremy]

Hi all
Will the mtm case hold 20in bolts with fixed broadheads on them
Thanks