Banshee Mission MXB320

Crossbow Hunting

Moderator: Excalibur Marketing Dude

User avatar
maine hunter
Posts: 2347
Joined: Thu Apr 19, 2012 6:23 pm
Location: maine
Contact:

Re: Banshee Mission MXB320

Post by maine hunter »

That's a nice looking bow!!!! Hope to see some pic of the victims soon!!!! :D
355 matrix, big johns arrows- zombieslayers, g5 montecs, strikers. Vortex big johns arrows- zombieslayers g5 montecs 125. Lumenoks.
Dereck
Posts: 1370
Joined: Wed Feb 11, 2009 4:44 pm
Location: Kitchener area Ont

Re: Banshee Mission MXB320

Post by Dereck »

Just bought a MXB320 as well. got a great deal on it so it was hard to pass up.

Will be taking it out today to put it thru the paces.

One of the big advantages of this bow for me is you can also adjust the draw weight with an allen key the same way you adjust a compound bow.

I have mine set at approx. 160 lbs I will add to Mikes review later today.
I have all the factory stuff that came with the bow a 4 X 32 Hawke scope similar arrows as Mike's but with 4 inch vanes.

Hey Mike I will post a pic of the foot stirrup I put on it.
If there is one complaint about bow is the placing of your feet when cocking so being me I made my own.
Tenpoint Matrix
newbie
Posts: 2828
Joined: Tue Jun 15, 2010 10:02 pm
Location: Brantford Ontario

Re: Banshee Mission MXB320

Post by newbie »

I got to play with Dons today. nice little bow. Qiuet easy to cock. Its different without a stirrup on it but could get used to it fast. I wasnt fond of the feel of the plastic grip nor the placement of the saftey. Its definatley a nice compact smooth shooting bow I could see owning but after handling his SZ350 i liked that bow alittle better and would probably get that one if i was in the market for a wheeled bow.
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
vixenmaster
Posts: 13618
Joined: Wed Sep 14, 2005 3:51 pm
Location: Western Ky

Re: Banshee Mission MXB320

Post by vixenmaster »

The safety takes some gettin used to fer sure. Plastic grip, mine has a rubberized on trigger grip & forarm. Mine is blk. in those areas. I am too lazy to get up & ck to be sure on the grip stuff :)
Half Bubble Off BD360

[email protected] 417-505-9315
Dereck
Posts: 1370
Joined: Wed Feb 11, 2009 4:44 pm
Location: Kitchener area Ont

Re: Banshee Mission MXB320

Post by Dereck »

Mine has the rubber inlay as well
Only difference I see between our bows is I have blaze orange strings

Shot a few today just to get the scope zeroed.
I think I will reset lb a little higher

Never have been a scope lover but the Hawke that came with it is quite clear with reasonably fine reticles
Tenpoint Matrix
vixenmaster
Posts: 13618
Joined: Wed Sep 14, 2005 3:51 pm
Location: Western Ky

Re: Banshee Mission MXB320

Post by vixenmaster »

I have my limbs fully cranked down, mine has the rubberized grips i was right on that. I have a red dot on it. It takes 22" arrows but i tried a 20" in it & its all good fer field pts n long ferruled mech. So i could trim the arrow weight down enuff to get 328 fps out it. Really nice compact lil crossbow. Now i jus need to get my 355 in my hands. I am gonna put my other varizone on it
Half Bubble Off BD360

[email protected] 417-505-9315
Dereck
Posts: 1370
Joined: Wed Feb 11, 2009 4:44 pm
Location: Kitchener area Ont

Re: Banshee Mission MXB320

Post by Dereck »

I have the basic Hawke scope that Mathews offered very nice may eventually switch it out for a varizone as the hawke only has three aim points.

Intial shooting with the lighter draw weight shows more drop than I would like so it will crank it to full and I will start over with sighting in.

Have shot many compound bows and this is by far the best I have shot
Tenpoint Matrix
Post Reply