33o brace height
Moderator: Excalibur Marketing Dude
-
- Posts: 763
- Joined: Fri Aug 10, 2007 8:55 pm
- Location: North bay, ontario
33o brace height
just wondering about brace height on matrix on my old excal there was two lines and on the new one there is only one , does the string need to be lined up on the mark as it arrived pre strung and of the line on rail. thanks
Re: 33o brace height
The brace height (string) should be approx. 3/4" back from where the top of the riser and rail meet. If R.E.D.S. are installed, then the gap between the string and bumpers should be 1/8".
ComfyBear
Micro Axe 340, Matrix 380, Matrix 355, Matrix 350, Exocet 200
ComfyBear Strings
G5 Montecs 125gr., SlickTrick 125 gr. Magnums
To thine own self be true.
Remove thine mask Polonius.
Live thy truth, doth not be false to any man.
Micro Axe 340, Matrix 380, Matrix 355, Matrix 350, Exocet 200
ComfyBear Strings
G5 Montecs 125gr., SlickTrick 125 gr. Magnums
To thine own self be true.
Remove thine mask Polonius.
Live thy truth, doth not be false to any man.
-
- Posts: 4804
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: 33o brace height
If brace height is too high you loose a few fps. If brace height is too low you can do damage to your bow. I usually err in the side of caution.
-
- Posts: 763
- Joined: Fri Aug 10, 2007 8:55 pm
- Location: North bay, ontario
Re: 33o brace height
ok thanks for replys, no as much info came with the bow this time, i will keep it just ahead of line