Arrow Wraps...

[Drew]

I'm looking for a reflective wrap for my arrows but I only want a 1" wide relfective wrap between the nock and the fletching. I've seen this on some arrows but cannot find a supplier. Does anyone know where I can find this?

[paulaboutform]

I don't know about 1" reflective wrap. I've got the 4"-5" reflective wrap that i cut into 1" strips. Not sure where to buy it though as I got mine from a friend. If you just Google search reflective arrow wraps I'm sure you'll find it. I know I've seen it.

[W.Miguire]

try Lancaster Archery .they have lots of stuff like that. you may have to cut to fit.
W.M.

[b44mag]

go to a vinyl sign shop get a bag of scrap pieces cut your own worked on my longbow woodies not sure if it would last on a crossbow should be good as the bought wraps

[Ont_Excal]

I'm looking for a reflective wrap for my arrows but I only want a 1" wide relfective wrap between the nock and the fletching. I've seen this on some arrows but cannot find a supplier. Does anyone know where I can find this?

Here is the best one I've found to date.

http://www.onestringer.com/index.php?pa ... &itemid=80

I like reflective before and after the vane.
The FAQ. drop down menu has a lot helpful topics.
Don't be afraid to send them an email if still not sure of what you want.
Great to deal with.

[Kegbelly]

I ordered mine direct from Onestringer. I got 9" long and 1 1/8" wide material. It's 3 strips per sheet and IIRC you get 4 sheets in a pack and it was around $12 or $13 US. It's enough to do a BUNCH of arrows if all you want is 1" wrap behind the vanes. The 1 1/8" width is almost a perfect fit to wrap the outside of a BE Executioner, Zombie, Firebolt or Diablo shaft (I've wrapped all four of those). I lay a square across it crossways and cut 3 strips at a time 1" wide, perfect fit with just a few hundredths of overlap.

[yooper_man]

I ordered my white reflective arrow wraps from ebay. One dozen 7"x1.25" for $5.00 shipped. Now it's $6.00, but they add in an extra 2 or 3 wraps.

I cut all of them down to 3.5"x1.125" which are perfect for my Easton 2219 aluminum shafts. This way my count has doubled, so I glue on my 2" Bohning Blazer Vanes. When I need to re-fletch, just peel and start over no fuss.

Andrew


http://www.ebay.com/itm/1-Dozen-WHITE-R ... 1c45da2e67

[buzrdluck]

arrowrap.com
got anything ya need
even have a design tool to create any design ya want

[Drew]

Has anyone taken the zombie logo wrap off their arrows and if so, how?

[Kegbelly]

I think it's a printed logo, not really a wrap. I've heard it comes off pretty easy with acetone. It's pretty soft, my target is scrubbing mine off pretty quick.

[paulaboutform]

Has anyone taken the zombie logo wrap off their arrows and if so, how?

I've taken mine off. Lots of acetone and paper towel and it comes off no problem.

[TYE]

Onestringer wraps are great to deal with. I get mine from them. Ordered a dozen last time they sent 2 dozen for price of a dozen. They're nice people too. Don't be afraid to call or email them with any questions.

[Drew]

My Zombies are now nekkid! The logo came off slicker 'n snot with acetone.

[8ptbuk]

Is it just me or don't wraps make arrows VERY hard to pull out of block targets ? They look great but I really hate fighting the target for my arrow ! Lol

[TYE]

Only if your vanes are buried into the target....