Kong & my Ramblin's

vixenmaster · Post by **vixenmaster** » Fri Jan 23, 2015 8:35 pm

I was thinkin of gettin some FOC's fer this yr. After lookin at my arrow supply all set up with brass inserts. I think i will stay with the Swhackers with him. I jus don't feel like boilin my arrows to pull the brass inserts out. I have lots of other stuff that needs doin,

I gotstid a TexFest to save up fer. I want to knock off a fat wild hog with my sml prior to deer season if'en can save up the funds.

Jerod B. · Post by **Jerod B.** » Fri Jan 23, 2015 8:46 pm

I'm putting FOC's and/or Slick Trick 175 Xbows in front of a 110 grain brass insert that has 50 more grains behind it.

The Front of Center should be around 26%

vixenmaster · Post by **vixenmaster** » Fri Jan 23, 2015 8:54 pm

Jerod B. wrote:I'm putting FOC's and/or Slick Trick 175 Xbows in front of a 110 grain brass insert that has 50 more grains behind it.

The Front of Center should be around 26%

Moose n Buffalo's wouldn't stand a chance

xcaliber · Post by **xcaliber** » Fri Jan 23, 2015 9:14 pm

Always something to drop money on, aye? I'm thinking hard about them FOC heads too, SEW has me just about convinced on them, but I got a couple packs of Spit Maxx to try first. I would bet Ole Kong would do some serious damage with them hole punches!

vixenmaster · Post by **vixenmaster** » Fri Jan 23, 2015 9:17 pm

xcaliber wrote:Always something to drop money on, aye? I'm thinking hard about them FOC heads too, SEW has me just about convinced on them, but I got a couple packs of Spit Maxx to try first. I would bet Ole Kong would do some serious damage with them hole punches!

If'en i wasn't savin up to make TexFest i would buy a pack & shoot them as my arrow set-up at 460gr of pure killin power!

xcaliber · Post by **xcaliber** » Fri Jan 23, 2015 9:29 pm

That's driving a van through them with that weight!

vixenmaster · Post by **vixenmaster** » Fri Jan 23, 2015 9:33 pm

Bet a nickel to a dollar you could drive the arrow thru both shoulders & into the ground!

xcaliber · Post by **xcaliber** » Fri Jan 23, 2015 9:37 pm

I'm sure of that!

bubba · Post by **bubba** » Sat Jan 24, 2015 9:30 am

Well Vixenmaster I just mailed you the money for one of your blended 8190 custom strings,my son has one of your strings stretched across his m 380 blackout and loves it! I know you are planning to go to texfest and you are a saving up for the trip. I hope my small order will help ya some, as for your ramblin's Your posts I always read twice, usually because it takes two times to figure out what you said {SMILE} only kidding .... No sir!! you are a bright spot on this forum. Have fun at texfest............

vixenmaster · Post by **vixenmaster** » Sat Jan 24, 2015 9:41 am

bubba wrote:Well Vixenmaster I just mailed you the money for one of your blended 8190 custom strings,my son has one of your strings stretched across his m 380 blackout and loves it! I know you are planning to go to texfest and you are a saving up for the trip. I hope my small order will help ya some, as for your ramblin's Your posts I always read twice, usually because it takes two times to figure out what you said {SMILE} only kidding .... No sir!! you are a bright spot on this forum. Have fun at texfest............

Bubba i wants you to knowed i have what is called a double edumacation, i spent 2 yrs in each grade til the 7th. They said a 20 yr old had no business in grade school at that age. Yes sir all small orders are how it works, thank you

Excalibur Crossbow Forum

Kong & my Ramblin's

Kong & my Ramblin's

Re: Kong & my Ramblin's

Re: Kong & my Ramblin's

Re: Kong & my Ramblin's

Re: Kong & my Ramblin's

Re: Kong & my Ramblin's

Re: Kong & my Ramblin's

Re: Kong & my Ramblin's

Re: Kong & my Ramblin's

Re: Kong & my Ramblin's