insert size for Diablo

vidsoutmike · Post by **vidsoutmike** » Fri Feb 13, 2015 9:37 pm

Can anyone tell me what size inserts I need for Diablo bolts?

I want to change to brass and want to be sure to order the correct size. I was told that .300 fits but the guy that told me was not sure. Thanks for any input.

redarlo · Post by **redarlo** » Sat Feb 14, 2015 7:27 am

Diablo shafts definitely take .300 inserts

newbie · Post by **newbie** » Sat Feb 14, 2015 1:48 pm

they actually are slightly larger at .315 as per luminoks sizing chart. Trying to find specs from easton is a pain its top secret stuff.

vidsoutmike · Post by **vidsoutmike** » Sat Feb 14, 2015 3:16 pm

Thanks for the input. I'm still confused. If Excalibur and easton want to keep my business, they better make it easier for me to get this done. I will go elsewhere. I was planing to buy another Xcal but after I got no response to my email, I may get a Scorpyd. At least they communicate with me.

bubba · Post by **bubba** » Sat Feb 14, 2015 3:47 pm

?????!!!!!!>>>>>>.......

way123hockey · Post by **way123hockey** » Sat Feb 14, 2015 8:37 pm

I just checked an Easton Firebolt and it is .303" ID. I believe the Firebolts, Diablos and Quills are the same dimensions are they not.

way123hockey · Post by **way123hockey** » Sat Feb 14, 2015 8:49 pm

newbie wrote:they actually are slightly larger at .315 as per luminoks sizing chart. Trying to find specs from easton is a pain its top secret stuff.

I think the luminok chart shows .3015" Mike. If that is the case then .300" inserts should be fine.

Lake shooter · Post by **Lake shooter** » Sat Feb 14, 2015 10:11 pm

They are the C2 shafts, right?

way123hockey · Post by **way123hockey** » Sat Feb 14, 2015 10:28 pm

Yes. The Firebolts are C2.

vidsoutmike · Post by **vidsoutmike** » Sun Feb 15, 2015 7:22 am

I don't know if "Firebolts" are the same. I only have the Diablo

bubba · Post by **bubba** » Sun Feb 15, 2015 8:09 am

Diablos and firebolts are the same.. Diablos are cut at 18" and have a heavier alu front insert, the firebolts are cut at 20" , both are c-2 Easton shafts............

vidsoutmike · Post by **vidsoutmike** » Sun Feb 15, 2015 8:30 am

Thanks everyone for the responses. They clear things up and now

I'm ready to order some components.

Excalibur Crossbow Forum

insert size for Diablo

insert size for Diablo

Re: insert size for Diablo

Re: insert size for Diablo

Re: insert size for Diablo

Re: insert size for Diablo

Re: insert size for Diablo

Re: insert size for Diablo

Re: insert size for Diablo

Re: insert size for Diablo

Re: insert size for Diablo

Re: insert size for Diablo

Re: insert size for Diablo