1. Remove the riser from the main frame.
I line the top of the scope up with the top of the pluck foam -
(The pluck foam stops about an inch from the edge)
Then I trace a line with a marker and pluck the foam to fit.
I then lay my riser an inch from the bottom and mark the limbs and center of the riser- then trim about a half inch deep place for the limbs and riser to sit in.
The main frame sits low enough that when I set the limbs on top they are above the main frame.
I also lay a small hand towel over the main frame to eliminate any possibility of the limbs rubbing the main frame. You will also notice in the pictures where I have plucked foam to fit the cocking aid, 2 screws for attaching the riser, 2 allen wrenches needed for the riser and stirrup, as well as the stirrup location.
It wotks great for me and keeps it well protected
Ron
Which kind of case do you use for your Excalibur?
Moderator: Excalibur Marketing Dude
- BrotherRon
- Posts: 2178
- Joined: Thu Aug 28, 2014 2:47 am
- Location: North Central Wisconsin
- Contact:
Re: Which kind of case do you use for your Excalibur?
Matrix 310 ~ Hawke XB30 Pro SR ~ TT~Plano 36" All Weather Tactical Hard Case.
Danny Miller Top Mount Quiver.
Strings by Boo ~ nchunterkw ~ 8ptbuk
Jeremiah 29:13
Danny Miller Top Mount Quiver.
Strings by Boo ~ nchunterkw ~ 8ptbuk
Jeremiah 29:13
-
- Posts: 249
- Joined: Sat Jul 18, 2015 6:53 pm
- Location: Missouri
Re: Which kind of case do you use for your Excalibur?
I made a case out of Wood. Heavy Duty. Safe place to store my bow. I carry my bow to my food plot shooting house. Only a 125 yd. walk from my house.
Happy Trails
Stephen
Happy Trails
Stephen
Matrix 380
Re: Which kind of case do you use for your Excalibur?
with my case I just undo the two rail screws and done, plus the case only cost me 40.00 bucks at the time....
exocet 200. STS dampers.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.
boo string and trigger work.
munch mount quiver mount.
125 gr slick trick magums.
2" blazers on 2117 XX75 w/ brass inserts.