Micro 335 Camo ( spec/questions ? )

[Sparkey]

First, does anyone know what the hex key size is for the main bolt that attaches the riser to the rail ?

Secondly, what are some suggestions for arrows to try ? I have 125 gr QAD Exodus broad heads and want to keep arrow weight around 375-390 grains. Also, with the shorter arrow, is a helical twist better than offset for the fletching ?

Mark

[tharris811]

I have a matrix 330 & 355 the bolts are 3/16 should be the same on yours
I like yhe spynal tapps I shoot a 125 grain head the arrow comes just about 400 grains but you can call Jerry at south shore and he can make it weigh what you want. (that is with a 18in )
the last I think is up to you. I have a twist in mine
Hope it helps I am sure others will give you more hints also
Tony

[Normous]

7/32", the above post is incorrect.
I really like a Black Eagle Executioner 16.5" .003 for the value and durability and use a aluminum front insert with a 170 grain FOC mechanical broadhead. The Arizona Bolt EZ fletch gives me the perfect helical using 2" Blazers.
Total weight is 375 gr.

[Sparkey]

7/32", the above post is incorrect.
I really like a Black Eagle Executioner 16.5" .003 for the value and durability and use a aluminum front insert with a 170 grain FOC mechanical broadhead. The Arizona Bolt EZ fletch gives me the perfect helical using 2" Blazers.
Total weight is 375 gr.

That is exactly the weight I am going for. Do you happen to know the weight of the front insert?

[Normous]

I use a 30 grain front aluminum insert and cut 3/16" off and uniform each to 22 grains. I like to tinker

[Normous]

Black Eagle has 80, 92 and 110 grain brass front inserts available to choose from. A 16.5" BEE, a plastic rear nock, (3) 2" Blazers, 80 grain brass front insert and your 125 grain broadhead will come into your preferred range at about 388 grains.

[Sparkey]

Thank you, greatly appreciated!

Mark