What arrow weight do you prefer?
Moderator: Excalibur Marketing Dude
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: What arrow weight do you prefer?
I use 375.
Re: What arrow weight do you prefer?
Been shooting 400gr since I started no reason to change.
Retired from the Working World
MICRO 355
50 CAL Traditions Pursuit
Mosburg 100ATR 30-06
Henry Lever 22lr
Mosburg 500
Savage 243
MICRO 355
50 CAL Traditions Pursuit
Mosburg 100ATR 30-06
Henry Lever 22lr
Mosburg 500
Savage 243
-
- Posts: 275
- Joined: Sun Feb 12, 2012 12:17 pm
Re: What arrow weight do you prefer?
I like the 400 range. I currently shoot 388 gr total arrow and head at 378 fps out of my 380 Matrix.
380 Matrix Extra
Hawke XB 30 Compact
Easton 2216 19 " 388gr... 378fps
100gr Spitfire/Wasp Jak-Hammer
Trigger Tech trigger
Hawke XB 30 Compact
Easton 2216 19 " 388gr... 378fps
100gr Spitfire/Wasp Jak-Hammer
Trigger Tech trigger
Re: What arrow weight do you prefer?
Around 400 grains for most crossbows but when using some slower crossbows I'll kick the arrow weight up quite a bit for increased penetration.
Been there Done that
Re: What arrow weight do you prefer?
Average is about 440gs.
- Ferguson Outfitters
- Posts: 257
- Joined: Sun Sep 18, 2016 12:14 pm
Re: What arrow weight do you prefer?
I like the Diablo with 125gr VPA Non Vented, total weight is 375gr. Now I like the 400gr setup with the bolt cutters too but then I had to go and weigh the bolt cutters. No two bolt cutters weighed the same and had as much as 20gr difference betwixed them which dissapointed me. They both go slam through in the right spot but the VPA will do it in the wrong spot.
I have to believe the recommended setup by Excaliber was thorough and presents the best compromise. I feel accuracy and penetration trump all else.
I think terms like "kinetic energy" should be dropped from the terminology concerning archery, it sounds so uninformed.
I think any Matrix between the Grizzly and 330 with a Nikon Bolt or ACOG using a stock string and 375-400 grain bolt, is a Nightmare!
I have to believe the recommended setup by Excaliber was thorough and presents the best compromise. I feel accuracy and penetration trump all else.
I think terms like "kinetic energy" should be dropped from the terminology concerning archery, it sounds so uninformed.
I think any Matrix between the Grizzly and 330 with a Nikon Bolt or ACOG using a stock string and 375-400 grain bolt, is a Nightmare!
Re: What arrow weight do you prefer?
I'm new here, just bought an Excalibur Matrix 350SE. This is only my second bow season and I hunted last year with a Carbon Express compound bow, but really wanted to get a recurve. So far arrows I plan on two things, both around 400 gr.
First, the stock Diablo arrows with the field tip for normal target practice and then the Excalibur Boltcutters for turkey and any coyotes I see.
For deer, I really want to make sure my shot is on target and really like the NAP Spitfires and bought them in 125 gr. To keep the 400 gr total I had Wyvern Creations build me custom Double Eagle Executioner 18" arrows with an 80 gr brass insert and then lumenocks. The total weighed out to 409 gr. They should be here tomorrow so I will dial in my bow/scope then and start looking forward to bow season in October.
First, the stock Diablo arrows with the field tip for normal target practice and then the Excalibur Boltcutters for turkey and any coyotes I see.
For deer, I really want to make sure my shot is on target and really like the NAP Spitfires and bought them in 125 gr. To keep the 400 gr total I had Wyvern Creations build me custom Double Eagle Executioner 18" arrows with an 80 gr brass insert and then lumenocks. The total weighed out to 409 gr. They should be here tomorrow so I will dial in my bow/scope then and start looking forward to bow season in October.
Matrix 350SE, Hawke XB1 SR, R.E.D.S., Guardian ADF, Diablos with 150 gr Boltcutters, Black Eagle Exectutioners with 125 gr NAP Spitfires, JBK String
-
- Posts: 43
- Joined: Tue Jun 27, 2017 9:45 pm
- Location: Hernando county Fl.
Re: What arrow weight do you prefer?
385 gr
Last edited by Back strap on Mon Mar 19, 2018 7:22 pm, edited 1 time in total.
Matrix 405// Twilight scope/ Vixen master string/ Munch mount/ aircurve 3 kwikee kwiver/ south shore archery 18 in spinal tapps/ plastic nock/ sk300 vanes/ 92 grain insert/100 grain ramcat. Huntin Fishin Lovin everyday. AKA-BUCKY
Re: What arrow weight do you prefer?
I'm shooting 430 grain Spynal Tapps. With a lumenok they are 459grains arrows.125 grain broadhead.
Excalibur Equinox
S5 bumpers
Hawke XB30 scope
Spynal Tapps 20inch with 92 gain inserts
Wasp Jakhammer 125gain
Munch mount
Force 10 string with cat whiskers
S5 bumpers
Hawke XB30 scope
Spynal Tapps 20inch with 92 gain inserts
Wasp Jakhammer 125gain
Munch mount
Force 10 string with cat whiskers
Re: What arrow weight do you prefer?
475 grains.....Gold tip lazer IV 16'' long @ 13.9 grains/inch, blazer vanes, 60 grain brass insert with 50 grain rear weight screwed in back for a total of 110 grain insert, 100 grain original rocky mountain gator expandable broadheads (now called blackout gator sold and owned by Bass Pro).
Shooting a matrix 405. Not sure how to vote in survey.
Shooting a matrix 405. Not sure how to vote in survey.
Re: What arrow weight do you prefer?
360GR for speed 385 for energy. My main hunting rig uses 385.
Micro_335 - Nikon Bolt XR - 15.5'' Zombies - Killzone 100GR
Matrix G340 - Nikon Bolt XR - Muzzy 100GR
Matrix G340 - Nikon Bolt XR - Muzzy 100GR
Re: What arrow weight do you prefer?
I like the diablos with 150 gr slick tricks for hunting
- Bolt Outdoors
- Posts: 6
- Joined: Mon Sep 02, 2013 8:54 pm
- Location: Floyd VA & Charleston SC
Re: What arrow weight do you prefer?
I'm new at this so please take it easy on me
I am using the good ole Diablo 18 inch 250 GR + NAP Spitfire XXX Mechanical Broadhead 100 Gr. Does that put me at 350 GR or are there other pieces I'm missing in my math?
![Smile :-)](./images/smilies/icon_smile.gif)
Matrix Bulldog 380
-
- Posts: 259
- Joined: Wed Oct 28, 2009 11:47 pm
- Location: Gheens, Louisiana USA
Re: What arrow weight do you prefer?
Stock 18" Diablos average,
400.5 gn with 150 gn field tips and aluminum nocks.
410.7 gn with 150 gn bolt cutters and Lumenoks.
10.2 gn difference, doesn't sound like much.
Don't guess POI shouldn't be that much different
Can anyone verify, I don't have a broadhead target.
400.5 gn with 150 gn field tips and aluminum nocks.
410.7 gn with 150 gn bolt cutters and Lumenoks.
10.2 gn difference, doesn't sound like much.
Don't guess POI shouldn't be that much different
![Question :?:](./images/smilies/icon_question.gif)
Can anyone verify, I don't have a broadhead target.
(2013) MATRIX 355
Tact-Zone scope
18" Diablo's
150gr Boltcutters
Danny's Flemish String
Rubber Baby Buggy Bumpers
(2009) EXOMAX 350
Varizone Scope
20" Fire Bolts
150gr Boltcutters
Ground Pounder Mount
Boo Strings
STS
Tact-Zone scope
18" Diablo's
150gr Boltcutters
Danny's Flemish String
Rubber Baby Buggy Bumpers
(2009) EXOMAX 350
Varizone Scope
20" Fire Bolts
150gr Boltcutters
Ground Pounder Mount
Boo Strings
STS
-
- Posts: 4
- Joined: Mon Aug 06, 2018 1:07 pm
Re: What arrow weight do you prefer?
I just bought a bulldog 360. Shoots great. I started w the bolts that came with it. Victory xbolts 188in with excal flat nock. I like to shoot with a lighted nock. So i bought the diablos with lumenocks already install.
The xbolts w 150 gr broad head is 426gr, . dioblos is the 408. I either continue to shoot the diablos or cut the standard 20in xbolt to 18in.
I found that black eagle carries an 18 in executioner pre fletched and front brass insert at 286hr. Add 29 for lumenock and 150 for BH making total wgt 465gr.
Is that too much weight if I go tjat route.
The xbolts w 150 gr broad head is 426gr, . dioblos is the 408. I either continue to shoot the diablos or cut the standard 20in xbolt to 18in.
I found that black eagle carries an 18 in executioner pre fletched and front brass insert at 286hr. Add 29 for lumenock and 150 for BH making total wgt 465gr.
Is that too much weight if I go tjat route.