Quick quesiton to the group. I just acquired a Cub for the kids to use and it came with a DeadZone mounted to it. It seems to be sitting a little low on the ADF, and wondering what size rings would be more appropriate for this scope? The scope cap doesn't even fit in the gap, so I don't think they are the factory rings that would have normally come with the scope.
Thanks for your help!
DeadZone scope rings
Moderator: Excalibur Marketing Dude
DeadZone scope rings
Last edited by RobD on Wed Aug 31, 2016 10:35 pm, edited 2 times in total.
Micro Suppressor 400 TD
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: ShadowZone scope rings
Rob it may need med. rings, i really don't knowed as i have never owned the Cub
Re: ShadowZone scope rings
Well, it's sitting on top of the Guardian ADF, so whatever rings are normally included should fit. These rings make it sit real low (I just fixed the pics).
Micro Suppressor 400 TD
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
Re: DeadZone scope rings
Maybe the rings just need to go forward a notch or two. Looking at the pics of the Grizzly with a Dead Zone, it appears the rings go on the 4th from the rear gap where on this Cub the previous owner had them on the 2nd from the rear gap. That would get the front of scope further forward and the scope caps would fit.
Micro Suppressor 400 TD
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
Re: DeadZone scope rings
On that short scope moving it forward might throw your eye relief way off as there is not a lot of room to maneuver inside the rings. Try it and see but I think you are probably going to need higher rings looking at the pictures.RobD wrote:Maybe the rings just need to go forward a notch or two. Looking at the pics of the Grizzly with a Dead Zone, it appears the rings go on the 4th from the rear gap where on this Cub the previous owner had them on the 2nd from the rear gap. That would get the front of scope further forward and the scope caps would fit.
Wildlife Population Control Specialist
Re: DeadZone scope rings
I just went and grabbed a spare scope mount out of a drawer and mounted a Dead Zone with Excal factory rings to it and it did not matter where I placed it the front of the scope did not touch the mount. It had about 1/16" clearance. The eye section was clear and not near touching also. I am pretty certain that the Excal factory rings that came with the scope are low ones.
Wildlife Population Control Specialist
Re: DeadZone scope rings
I mounted the scope just like it is pictured on a Grizzly, and I'm happy with it. The scope caps now fit, and the eye relief is just right. Now it is stretching out the the new string from vixenmaster so I can get it sighted in and ready for poker season.
Micro Suppressor 400 TD
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!