Arrow and Bow combinations of forum members

Crossbow Hunting

Moderators: Bill T, Excalibur Marketing Dude

Post Reply
ironeyes
Posts: 24
Joined: Mon Jul 17, 2017 9:34 pm

Re: Arrow and Bow combinations of forum members

Post by ironeyes » Wed Mar 27, 2019 3:08 pm

Im currently running 22"maxima blues with 100gr muzzy fixed in my EMag
18" GT Nitro's with Blazers and Lumenok's with 100gr Muzzy Trocars in my Matrix 350 and my Daughter has the same for her Micro 308 but cut to 17" and running magnus black hornets

All setups shoot better than I do to 50yds

longbow joe
Posts: 3001
Joined: Sat Jun 06, 2015 9:55 pm
Location: south eastern pa (bucks county)

Re: Arrow and Bow combinations of forum members

Post by longbow joe » Fri Apr 12, 2019 7:42 am

Micro,m355.vixen ,Phoenix ,lbex., m330, all share a factory zombie 110 grain lately l like an xact cut ,spitfire max.A cabellas lazer strike 2 and a dead ringer super freak extreme. on the m355 . 17 and 20 inch bolts . That's the beauty of the expandable head all basically fly the same with basically no change in impact makes tuning a bunch of bows a lot less stress
Micro 335 camo crossbones /matrix 330 nikon bolt /vixen ll / offspring with a micro stock crossbones/ matrix 355 with a micro stock crossbones/ metal ibex (adopted manco morto)/Phoenix/ trigger tec's /xacts/super freak ex's/ spitfires/zombies

User avatar
Jack Pine
Posts: 30
Joined: Mon Mar 23, 2015 3:27 pm
Location: Fife Lake MI

Re: Arrow and Bow combinations of forum members

Post by Jack Pine » Mon Apr 15, 2019 9:01 pm

Easton XX75 aluminum, arrows the same for both Micros, only the heads change. 15" shaft, flat aluminum nocks. The 335 shoots 100 grain Spitfire, the 355 shoots a 170 grain Spitfire.
"I was crossbow when crossbow wasn't cool"
Excalibur Micro 335 camo + TTss "Baby Huey"
Excalibur Micro 355 camo + TTss "Big Huey"
Man Kung MK-150A3B + AMS jug reel forcefeeder
XX75 2219 Death Darts and Flemish strings.

Cardinalsfanforever
Posts: 335
Joined: Sat Aug 18, 2018 8:10 pm
Location: Sout. Illinois

Re: Arrow and Bow combinations of forum members

Post by Cardinalsfanforever » Sat Jun 01, 2019 11:02 pm

matrix 380
18" diablos, 150 grn points
Zombie Slayer 18"
micro 315
16.5" quill's
still experimenting!!!!!
matrix 380, 18" BEZS, Vixenmaster
micro 315, 17" BE Execs. Vixenmaster
Axiom SMF, FIRE BOLTS Vixenmaster

Puddle Rat
Posts: 2
Joined: Mon May 27, 2019 10:19 am

Re: Arrow and Bow combinations of forum members

Post by Puddle Rat » Thu Jun 06, 2019 8:28 pm

The current meat axe is a Vortx with a twilight, whatever the stock shafts are with 100gr grim reaper‘s

Very soon going to be upgrading to a 440 :thumbup:

Big45
Posts: 8
Joined: Sat Jul 06, 2019 9:07 pm

Re: Arrow and Bow combinations of forum members

Post by Big45 » Tue Jul 30, 2019 10:36 pm

18 inch diablos with 150gr Magnus stingers (4 blades)

I have some 125gr black hornets on the way, I’m hoping the poi is the same as my stingers.

Froghunter
Posts: 26
Joined: Tue Nov 28, 2017 8:22 am
Location: Clayton, Delaware

Re: Arrow and Bow combinations of forum members

Post by Froghunter » Sun Aug 18, 2019 5:28 pm

Image

This is my 308 Short that will see the most of the 2019/2020 Whitetail Deer/ Spring Turkey season!

The arrows I am using are Black Eagle Zombie Slayer 15”, 110 grain brass insert, 1 1/8” setback Bohning Blazer vane in Neon Green, and Nufletch Ignitor nocks! (From South Shore Archery) These weight in at 375 grains with 75 grain field point and 75 grain Muzzy MX-3 or the Innerloc 75 grain broadhead!

Thanks and Looking Forward to The Hunting Season!
Deerhide Brown Vixen, Vari Zone Scope, Flemish String,
GT Swift Pro 18”, 110 Grain Insert

Silent Night (308 Short), Dead Zone Scope, Flemish String, B.E. Zombie Slayers 15”, 110 Grain Insert

😎

Froghunter
Posts: 26
Joined: Tue Nov 28, 2017 8:22 am
Location: Clayton, Delaware

Re: Arrow and Bow combinations of forum members

Post by Froghunter » Mon Aug 19, 2019 10:39 am

Image

Deerhide Brown Vixen ready to go into the deer woods! Plan is to use it the first month of the season (1st of September to 1st of October) and after that for squirrel hunting.

GT Swift Pro 18”, 110 grain brass insert, Bohning Blazer (2 green hen, one Yellow cock vane), Nufletch Green igniter nocks, 75 grain Muzzy or Innerloc fixed blade broad-head.

Enjoy and Be Safe!
Deerhide Brown Vixen, Vari Zone Scope, Flemish String,
GT Swift Pro 18”, 110 Grain Insert

Silent Night (308 Short), Dead Zone Scope, Flemish String, B.E. Zombie Slayers 15”, 110 Grain Insert

😎

Calmond
Posts: 4
Joined: Fri Jul 12, 2019 8:30 am

Re: Arrow and Bow combinations of forum members

Post by Calmond » Mon Aug 19, 2019 9:14 pm

Matrix 380 with 18" BEE's and Blazer vanes. I've always shot the old Thunderhead 160gr 3 blades, 1 3/8" cut in my compounds and still have a good supply of new heads. Tried them and couldn't be more pleased, as accurate as my 150 gr field points to 60 yds.

User avatar
janesy
Posts: 3251
Joined: Sat Dec 05, 2015 8:20 pm
Location: Beavertown. Ont

Re: Arrow and Bow combinations of forum members

Post by janesy » Mon Aug 19, 2019 10:03 pm

Froghunter wrote:
Sun Aug 18, 2019 5:28 pm
Image

This is my 308 Short that will see the most of the 2019/2020 Whitetail Deer/ Spring Turkey season!

The arrows I am using are Black Eagle Zombie Slayer 15”, 110 grain brass insert, 1 1/8” setback Bohning Blazer vane in Neon Green, and Nufletch Ignitor nocks! (From South Shore Archery) These weight in at 375 grains with 75 grain field point and 75 grain Muzzy MX-3 or the Innerloc 75 grain broadhead!

Thanks and Looking Forward to The Hunting Season!
Post that shorty up in the general section. Not many customized 308s on display :thumbup:
Micro-Hybrid-bulldog "PitBull370"
MOBU Micro BD345 "Greener"
Blackout BD-Axe "Hatchet340"

Every little sound in the bush sounds like footsteps... Until you hear footsteps!

Rubicon1000
Posts: 19
Joined: Thu Mar 15, 2018 7:20 pm

Re: Arrow and Bow combinations of forum members

Post by Rubicon1000 » Wed Sep 04, 2019 1:33 pm

Matrix 405 using 18" xbolts with a brass insert and bolt cutter 150gr.
Matrix 330 using factory 18" diablo with aluminum inserts and 100gr Excalibur mechanical heads. Both have Flemish twist strings.
Mega 405 and a matrix 330.

User avatar
amythntr
Posts: 6492
Joined: Wed Nov 13, 2013 12:26 pm
Location: T.P.R.N.J.

Re: Arrow and Bow combinations of forum members

Post by amythntr » Wed Sep 04, 2019 5:05 pm

....my recipe on my A360 is:

.....16.5 inch Zombies at 9g per inch = 148.5g,
.....92g inserts,
.....100g Spitfire w/ dental band,
.....Lumenok= 29g
.....Silent Knight 200 fletching at 6g per vane (I believe) = 18g (much better than Blazers IMHO)
.....approx 1g of glue

total yield= approx 388.50 g

I make my own arra's

Anthony :D
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.

Anthony :D

A420TD (Assassinatore di Cervi)
A360 (l'Assassino)
2-AXE 340
Scorpyd DS (w/AeroCrank AD)
G1-NM335(On loan)
ZS,Ex
Spits
Boo,NChunterkw,Vixenm

Potter
Posts: 17
Joined: Mon Nov 18, 2019 7:55 pm

Re: Arrow and Bow combinations of forum members

Post by Potter » Wed Nov 27, 2019 11:07 am

Bd440,pro flight arrows, excalibur mech hds.

Exocet 200 , 20 in carbon arrows, 100g mechanical hd

440 is new has not seen much action, 1 buck. The exocet 200 used very much and still works great.
Bulldog 440. Exocet 200

User avatar
AJ01
Posts: 423
Joined: Fri Nov 24, 2017 10:09 am
Location: Deep in the Heart of the East Texas Piney Woods!

Re: Arrow and Bow combinations of forum members

Post by AJ01 » Mon Feb 10, 2020 4:41 pm

Ram1590 wrote:
Thu Dec 06, 2018 10:29 pm
I have just purchased a Micro Suppressor any suggestions on best bolt, broadhead and grain combo to use other than the Quill and Bolt Cutters? I am new the crossbow forum so be gentle. LoL.. I have hunted for years with my compound but this is like starting from scratch all over again.. I just ordered my quiver mount from Munchmounts. He has been very helpful and I am very greatful for his willingness to guide me in right direction. If anyone has any mods or beneficial info I would greatly appreciate the opportunity to utilize the forums experience! Thanks in advance!
My Micro Suppressor 355 likes 16.5 BEE's spine indexed to .001. Then a 110g brass insert goes in the nose piece. 2 inch Blazer vanes help steer the stick. Tail lights are Lumenoks. I then add my favorite 100g "pointy thing" to the front assembly and give them a fling!!
These shoot really well in my setup!
If you don't have a builder or make your own, try David @ Wyvern Creations if you're in the Lower 48.

AJ
"No matter how big a hammer you use, you can't pound common sense into stupid people"!! :eusa-deadhorse:
"Howdy" and Happy Hunting from the Heart of the East Texas Piney Woods!! :wave:
Micro Suppressor 355 :mrgreen:

Post Reply