Rubber Baby Buggy Bumpers
Moderator: Excalibur Marketing Dude
Rubber Baby Buggy Bumpers
Just ordered a set of the Rubber Baby Buggy Bumpers and was curious as to how they install on a Matrix 350 LE?
-
- Posts: 373
- Joined: Sat Mar 19, 2016 4:51 pm
- Location: China Spring, Tx
Re: Rubber Baby Buggy Bumpers
EZ . Just stick the post end of bumper into factory equipped hole on bow and tighten up with Allen sets crews that will come with bumpers . No thinking required.
Matrix 350 LE 18 in. Diablos 150 gr. Boltcutters Zombie Slayers 150 gr. Slick Tricks C2 crank Hawkke XB 30 Pro SR
-
- Posts: 373
- Joined: Sat Mar 19, 2016 4:51 pm
- Location: China Spring, Tx
Re: Rubber Baby Buggy Bumpers
Oh yeh and every so often loosen up your set screws and orientate the rubber part of your bumpers as to lenghthen it's life as to where the string is slapping it.
Matrix 350 LE 18 in. Diablos 150 gr. Boltcutters Zombie Slayers 150 gr. Slick Tricks C2 crank Hawkke XB 30 Pro SR
-
- Posts: 112
- Joined: Sun Jun 10, 2012 8:14 pm
- Location: Northwest Louisiana
Re: Rubber Baby Buggy Bumpers
You don't have to loosen the screw to do that, you can just turn the bumper on its post.Arrowflinger wrote:Oh yeh and every so often loosen up your set screws and orientate the rubber part of your bumpers as to lenghthen it's life as to where the string is slapping it.
Phoenix
Matrix 380 Xtra
Exomax
Matrix G340
Klingons do not hunt because they need food. The hunt is a ritual that reminds us of where we come from. - Lieutenant Worf
Matrix 380 Xtra
Exomax
Matrix G340
Klingons do not hunt because they need food. The hunt is a ritual that reminds us of where we come from. - Lieutenant Worf
-
- Posts: 65
- Joined: Fri Apr 15, 2016 7:40 pm
- Location: Millville, New Jersey
Re: Rubber Baby Buggy Bumpers
Easy-Peasy. Even I couldn't make a mess of that installation.
Matrix 355
Axiom
NRA
UBNJ
DU
Axiom
NRA
UBNJ
DU
Re: Rubber Baby Buggy Bumpers
Where are the set screws at? I guess once I get them in my hands I will understand. Just can't tell from the pictures I have seen.
-
- Posts: 65
- Joined: Fri Apr 15, 2016 7:40 pm
- Location: Millville, New Jersey
Re: Rubber Baby Buggy Bumpers
They're included with the "bumpers", tiny screws in a tiny ziplock bag.
There are threaded holes on the underside of the riser, beneath the holes that the bumpers slide into.
There are threaded holes on the underside of the riser, beneath the holes that the bumpers slide into.
Matrix 355
Axiom
NRA
UBNJ
DU
Axiom
NRA
UBNJ
DU
Re: Rubber Baby Buggy Bumpers
JerseyJeff wrote:They're included with the "bumpers", tiny screws in a tiny ziplock bag.
There are threaded holes on the underside of the riser, beneath the holes that the bumpers slide into.
Ok, I see where the set screws will go now. Thanks!
-
- Posts: 1258
- Joined: Sun Apr 26, 2015 5:32 pm
- Location: VANCOUVER, WA
Re: Rubber Baby Buggy Bumpers
You probably know, but just in case, adjust your string for a 3/16 - 1/4" gap between it and the bumpers after instalatin.
Gene
Gene
Camo Micro 355 w/ XB30 SR Pro & TT trigger
Camo Matrix 380 W/ XB 30SR Pro & a Boo trigger
Very Nice 98 Jeep Tj
Sweet old 73 Bronco ( 2nd Owner)
Scamp tralier
Camo Matrix 380 W/ XB 30SR Pro & a Boo trigger
Very Nice 98 Jeep Tj
Sweet old 73 Bronco ( 2nd Owner)
Scamp tralier
Re: Rubber Baby Buggy Bumpers
Thank you for the tip!L. E. Carroll wrote:You probably know, but just in case, adjust your string for a 3/16 - 1/4" gap between it and the bumpers after instalatin.
Gene