scope
Moderator: Excalibur Marketing Dude
-
Greg Dewar
- Posts: 2
- Joined: Thu Sep 29, 2016 4:31 pm
scope
Do you need to center a scope before you sight in the scope. Sorry I mean is you turn your scope adjustment all the way to one side and count the clicks and divide in half Say you have 116 total clicks so you have 58 to the left and 58 to the right your adjustment is in the center I have read this some where on you tube the sites proclaimliberty2000 check it out
Last edited by Greg Dewar on Sun Jan 01, 2017 8:41 pm, edited 2 times in total.
-
retrieverman
- Posts: 507
- Joined: Wed Sep 01, 2010 2:03 am
- Location: Texas
Re: scope
What do you mean by "center a scope"?Greg Dewar wrote:Do you need to center a scope before you sight in the scope
If the scope is mounted in rings on a base on the crossbow, it should just need to be sighted in.
-
flightattendant100
- Posts: 4804
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: scope
If you are speaking of the adjustments, no. I start out at a short distance when I start shooting to make sure I am on target, then sight in as usual.retrieverman wrote:What do you mean by "center a scope"?Greg Dewar wrote:Do you need to center a scope before you sight in the scope
If the scope is mounted in rings on a base on the crossbow, it should just need to be sighted in.
-
vixenmaster
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: scope
I use a plumb bob to set my xhair fer the vertical. sSo i have my windage correct to start my sight-in