R.E.D.S.
Moderator: Excalibur Marketing Dude
Re: R.E.D.S.
Did you just change the string, or is this a new crossbow? If yes to either question, cock the bow overnight, let it down and recheck the gap. If it came down, great, if not shoot it a few times.
It’s not the way you rock, it’s the way that you roll!
Re: R.E.D.S.
Left it cocked overnight. No change, will try some shooting to see if that reduces gap. Got slammed with two foot of snow, may be a couple days.
Re: R.E.D.S.
Do you have a Micro, or a Matrix? If its a Micro you may have the wrong stops.
BD400 w/ TT, HHA, Leupold 2-7x 33mm, 8ptbuk String, Munch Mount "Y", Kwikee-3SS, Dr Stirrup Kit
Grizzly, 8ptbuk String
18" SSST 112 gr Insert, SK300, Ignitor
18" BEZS 110 gr insert, Blazers, Lumenok
VPA 3 blade vented 100 gr
Grizzly, 8ptbuk String
18" SSST 112 gr Insert, SK300, Ignitor
18" BEZS 110 gr insert, Blazers, Lumenok
VPA 3 blade vented 100 gr
Re: R.E.D.S.
Rookie here,matrix 350 se,I matched the r.e.d.s. To the model. Not sure about twist it came strung. Thai you for trying to help
Re: R.E.D.S.
What will that much gap do to my shooting? Thanks
Re: R.E.D.S.
If you take out a few twists you will lower the height. Don has a good question there. You don't want to untwist the string too much. Good rule of thumb is one twist every two inches in length.
It’s not the way you rock, it’s the way that you roll!
Re: R.E.D.S.
If you have the factory green string on it was made short on purpose. Simply start shooting it, it will stretch.
Wildlife Population Control Specialist
Re: R.E.D.S.
That's the one I have. Thank you
Re: R.E.D.S.
Sorry for all the questions,my brace height is 1.5" because of new string. Will it damage my bow shooting this brace ht. Till string breaks in?
Re: R.E.D.S.
portalto wrote:Sorry for all the questions,my brace height is 1.5" because of new string. Will it damage my bow shooting this brace ht. Till string breaks in?
Nope. Shoot it.
Wildlife Population Control Specialist