Micro suppressor brace height

[donny.brooke]

Got the new bow in today but doesnt have the proper instruction manual with it. Need to know proper brace height mine is 2 inches from back side of string to gap of the rail and limb assembly. Also is there a proper torque for the single bolt that holds the limb ass.to the rail ? Also string gap for the limbsaver string stops.

[Hi5]

On left side of page click on "Excalibur Crossbows" if it isn't already showing the Suppressor model on the list. When it brings up the Suppressor model click on it. Then click on the instructional info.

[longbow joe]

I set a new string a half inch from the bumpers ....it will stretch after that l like one quarter inch as a permanent resting place. You can experiment but its a good start point . Enjoy your new quiet bow.

[mr meat]

Most keep the string 1/4 off of bumpers

[kjl]

Bought mine from dealer at 7/8 "off bumpers. I set my string at 1/2 " off bumpers and since i ve shot it roughly 70 times. The string slowly adjusted to 1/4 " off bumbers. Seems to be shooting nicely!