Lumi-Zone Scope
Moderator: Excalibur Marketing Dude
Lumi-Zone Scope
I tried searching the forums but found nothing on this subject. I’ve been reading for hours and couldn’t find what I needed. Does anyone know the size of Butler Creek Scope Caps needed for the Excalibur Lumi-Zone Scope? Any help will be greatly appreciated!
Burky247365 Custom Scorpyd Orion Extreme
Re: Lumi-Zone Scope
bigbowman wrote:I tried searching the forums but found nothing on this subject. I’ve been reading for hours and couldn’t find what I needed. Does anyone know the size of Butler Creek Scope Caps needed for the Excalibur Lumi-Zone Scope? Any help will be greatly appreciated!
....have you considered calling the good doctor, Danny Miller.....I am sure he would be able to help you!
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: Lumi-Zone Scope
I did call Danny yesterday and he couldn’t remember the size of the caps for an Alumi-Zone scope!
Burky247365 Custom Scorpyd Orion Extreme
Re: Lumi-Zone Scope
bigbowman wrote:I did call Danny yesterday and he couldn’t remember the size of the caps for an Alumi-Zone scope!
....How about contacting "customer support" at BC website for some guidance?
https://www.butlercreek.com/overland-pa ... er-support
US Customers
Toll free: 800-423-3537
Phone: 913-752-3400
Fax toll free: 800-548-0446
Fax: 913-752-3550
ADDRESS
9200 Cody
Overland Park, KS
66214-1734
Canadian Customers Toll free: 800-361-5702
International Department Phone: 913-752-3400 Fax: 913-752-3572
Dealers & Retailers Toll free: 800-221-9035 Fax: 800-548-0446
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: Lumi-Zone Scope
Get a tape measure and see what the outside diameter is of the eye piece and the objective. Then go to the Butler Creek site and see which caps you need. It is about 3/4 way down the page.
https://www.butlercreek.com/-/media/9c2 ... f4ff95.pdf
https://www.butlercreek.com/-/media/9c2 ... f4ff95.pdf
Wildlife Population Control Specialist
Re: Lumi-Zone Scope
Thanks guys for all your tips and help! I'm not new to crossbows, just new to Excalibur & recurves! One thing is for sure, I will never go back to another compound crossbow as long as I can hunt! Love these recurves now!
Burky247365 Custom Scorpyd Orion Extreme
Re: Lumi-Zone Scope
I did as Danny Miller told me to do. I took the bow into my gun shop to get the exact size scope covers that were needed! The Lumi-Zone eyepiece size is 20 (1.775" , 45.1 mm) & the objective lens size is 07 (1.8-1.89", 45.72-48.0 mm). hope this will help someone else in the furtue! Thanks again for all the replies!
Burky247365 Custom Scorpyd Orion Extreme
Re: Lumi-Zone Scope
You are luck to have a shop that has them in stock. I would have to drive a 40 to 60 mile round trip drive to find one that might have the ones I was looking for. I measure, look up the online charts and order off eBay. Never got the wrong ones yet.
Wildlife Population Control Specialist
Re: Lumi-Zone Scope
Yeah, my local gun/bow shop is awesome! He usually has anything and everything that you could possibly need! I give him my business because I always try to support local ma & pa shops and I can Not beat the sevice and value that he has added to the hunting community over the years! I’m like a kid in a candy store every time I go in there!
Burky247365 Custom Scorpyd Orion Extreme