Axe brace height?

[bobcattrapper]

So what brace height are ya’ll using on your axe 340 off the factory reds? Thanks!

[hunter with MS]

I am at 1/8 to 1/2 more 1/2

[bobcattrapper]

Ok I will try to keep mine set 1/2” too.

[Forkston]

What does the owners manual say

[xcaliber]

If you have string stops, and I highly recommend that you do, you should be 1/4" off the bumpers relaxed. If using drStirrup stops, I set my string until it's just off the bumpers, then i take out one twist, they are supposed to rest into the bumper a little with those.

[hunter with MS]

owners manual 1/8 to 1/2 with bumpers since axe comes with bumpers 1/2

[curious]

Should be 2-3/4" from the intersection of the bow to the riser which is around 1/4"to 5/16" from the reds

[Boo]

If you have string stops, and I highly recommend that you do, you should be 1/4" off the bumpers relaxed. If using drStirrup stops, I set my string until it's just off the bumpers, then i take out one twist, they are supposed to rest into the bumper a little with those.

Yep!