curious wrote: ↑Fri Jul 31, 2020 2:51 pmI was at the range this morning at 6.30am very calm no wind testing the Trailblazers. They were shooting 2" left of my fieldpoints and 1" low whereas my Wasps are shooting within .5" of my fieldpoints at 40 yards. I am on the fence right now regarding these broadheads. I thought that they would have been closer to my fieldpoints. I spinned them and they were as good as the wasps for concentricity, considering they have a much smaller diameter than the Wasps I am kind of disappointed. I will give them another workout next week to see if I can get to a happy medium.
Excalibur TrailBlazers
Moderator: Excalibur Marketing Dude
Re: Excalibur TrailBlazers
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: Excalibur TrailBlazers
Interesting feedback, thanks Frank.curious wrote: ↑Fri Jul 31, 2020 2:51 pmI was at the range this morning at 6.30am very calm no wind testing the Trailblazers. They were shooting 2" left of my fieldpoints and 1" low whereas my Wasps are shooting within .5" of my fieldpoints at 40 yards. I am on the fence right now regarding these broadheads. I thought that they would have been closer to my fieldpoints. I spinned them and they were as good as the wasps for concentricity, considering they have a much smaller diameter than the Wasps I am kind of disappointed. I will give them another workout next week to see if I can get to a happy medium.
Not a deal breaker for me, I sight in each season with the arrow and Broadhead combo everytime. As long as the arrow hit the same spot with the Broadhead of choice installed I'm good
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: Excalibur TrailBlazers
I agree Chris, this is my first time testing mechanicals and it's not too bad at 40 yards really. I will adjust my scope to make them hit dead on then do A double check on my field points. I'm more interested in the blood trail and lethality, it's no problem to adjust the scope to make them hit where they need to be. I will make the adjustments as required. Looking forward to October 1st
Micro Axe 340 Kryptek Raid
Bushnell Elite 4200 2.5x10x40, HHA Tetra XB
Dr Stirrup Bumpers
BEE'S 400 grains with ignitor lighted nocks
Boo force 10 strings
Bushnell Elite 4200 2.5x10x40, HHA Tetra XB
Dr Stirrup Bumpers
BEE'S 400 grains with ignitor lighted nocks
Boo force 10 strings
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: Excalibur TrailBlazers
Who has them in the USA ? What are they called from Innerloc ?
Re: Excalibur TrailBlazers
Innerloc Devastation Crossbow Broadheadhunter with MS wrote: ↑Tue Aug 04, 2020 7:12 amWho has them in the USA ? What are they called from Innerloc ?
There are internet vendors with them in stock. I ordered 2 packs to try out.
Micro Suppressor 400 TD (Two of 'em)
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Matrix 380
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Matrix 380
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: Excalibur TrailBlazers
Another question I have sent innerloc do they make practice blades for it ? They do for the Exp .
Re: Excalibur TrailBlazers
.... if they don’t , Spitfire does.... these BH look extremely close to the Spit’shunter with MS wrote: ↑Wed Aug 05, 2020 2:58 pmAnother question I have sent innerloc do they make practice blades for it ? They do for the Exp .
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: Excalibur TrailBlazers
They don't make practice blades .
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: Excalibur TrailBlazers
ordered 4 packs from innerloc ,
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: Excalibur TrailBlazers
ordered 4 packs from innerloc , I have no idea why it double posted did this a few days ago Sorry
Last edited by hunter with MS on Fri Aug 14, 2020 4:27 pm, edited 1 time in total.
Re: Excalibur TrailBlazers
The Innerloc ones have the red aluminum instead of the Excalibur blue. I like the looks of the red better, which is why I have 2 packs of them.
Micro Suppressor 400 TD (Two of 'em)
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Matrix 380
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
Bulldog 360 Blackout
Micro 360 TD Pro (Kryptek Altitude)
Matrix 380
Vixenmaster strings - Love 'em! | DrStirrup - Good stuff man!
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: Excalibur TrailBlazers
So do I .
- Robinsons Rebel
- Posts: 322
- Joined: Sat Jun 18, 2016 12:48 pm
- Location: Denham Springs,Louisiana
Re: Excalibur TrailBlazers
Is there any real difference between the innerloc vs. trailblazer? Looks like one uses a filament, the other a pad.
2016 Matrix Grizzly (Red Bud)
18¨ Diablo lumenok bolts
100 gr. Trailblazer broadheads
Nikon Bolt XR
R.E.D.S
String by xcaliber
"There are only two seasons in a year.. hunting season and waiting for hunting season"
18¨ Diablo lumenok bolts
100 gr. Trailblazer broadheads
Nikon Bolt XR
R.E.D.S
String by xcaliber
"There are only two seasons in a year.. hunting season and waiting for hunting season"
Re: Excalibur TrailBlazers
Innerloc makes Excaliburs broadheads. They are the same aside from colour. The filament is essentially a super thin piece of string trimmer line. It's replaced on ever shot and is extremely easy to do.Robinsons Rebel wrote: ↑Fri Aug 14, 2020 7:26 pmIs there any real difference between the innerloc vs. trailblazer? Looks like one uses a filament, the other a pad.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: Excalibur TrailBlazers
Got to shoot mine NOT IMPRESSED . Shot them not glued shut into my block had a blade break off and the rest twist or bend first shot . What it did was pull the spring that holds the blade out through the the side of the body of the bh.