Limb and Riser swap

Crossbow Hunting

Moderator: Excalibur Marketing Dude

Post Reply
Diamond Dick
Posts: 25
Joined: Sat Mar 24, 2007 9:18 pm
Location: Fond du Lac, WI

Limb and Riser swap

Post by Diamond Dick »

I have a Matrix Sapphire and a Matrix 355. What do I get if I swap risers and limbs from one to the other?
longbow joe
Posts: 4246
Joined: Sat Jun 06, 2015 9:55 pm
Location: south eastern pa (bucks county)

Re: Limb and Riser swap

Post by longbow joe »

Both limbs are exactly the same and I'm pretty sure risers are the same the rail length determines the poundage.
The sapphire stock would be very unbalanced if you put the 355 rail on it . And you would have to tap another hole for the fore grip. Screw.
In simple terms you'll get nothing.
Someone will correct me if I'm wrong about the riser on the sapphire it may be swept back but l dought it. I have both but l dont have them here to look
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Diamond Dick
Posts: 25
Joined: Sat Mar 24, 2007 9:18 pm
Location: Fond du Lac, WI

Re: Limb and Riser swap

Post by Diamond Dick »

The Sapphire has a swept back riser and the Matrix 355 has a forward riser. It is a straight up swap.
Diamond Dick
Posts: 25
Joined: Sat Mar 24, 2007 9:18 pm
Location: Fond du Lac, WI

Re: Limb and Riser swap

Post by Diamond Dick »

The Sapphire should gain and the Matrix 355 should lose. End up with two 330's ?
Post Reply