Ibex and C2 Crank Cocking Aid

[Silver Bear]

Just purchased a C2 Crank Cocking Aid from Danny Miller (a terrific guy) because I hurt my shoulder
trying to cock my Ibex crossbow during last deer season. The crank does not seem to fit on the back of
my Ibex. Is this the right cocking crank for the Ibex?

Thanks,
Silver Bear

[wheelsquad]

A C2 is supposed to fit. Of anyone out there Danny would definitely know what fits. Are you sure you got a C2 and not the original Crankaroo?

Do you just have the plain stock, and not the extender on it?

[xcaliber]

To get it on the butt of the stock you must back off that screw on the crank all the way, then tighten it into the hole in the stock to hold it in place. Check out the video.

https://www.youtube.com/watch?v=TN5n-1o5f28

[onebigskittle]

The C2 works on my Ibex

[AJ01]

first of all, make sure the "stock screw" is adjusted all the way out. If it is NOT, it will not attach to the stock.

I has to look like this before mounting.



Hope this helps.

AJ

[Silver Bear]

Thanks! Good information. Backed the screw all the way into the cocking aid an it fit my Ibex.

[xcaliber]