Mag air question
Moderator: Excalibur Marketing Dude
-
- Posts: 4250
- Joined: Sat Jun 06, 2015 9:55 pm
- Location: south eastern pa (bucks county)
Mag air question
Being a "plastic " frame would this new light weight wonder accept a pro shot trigger???
Vixen 2, metal ibex,Phoenix,sapphire,matrix 330 ,matrix 355 ,vortex and baby grand piano y25 relayer.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
Trigger tecs,leupold crossbones and nikon bolts.
Zombie slayers and mostly swat broadheads.
-
- Posts: 610
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Mag air question
Well they say the Pro Shot does not fit the SMF bows, which is true. But I know a guy that really wanted to put one in his G340 so he looked into it more, and the only reason the Pro Shot doesn't "fit" per Excalibur is because the pro shot trigger blade is wider where the pivot pin is, and interferes with the SMF rail just slightly. Tiny bit of dremel touch up and he now has a Pro Shot in his SMF bow.
But the Mag Air isn't just an SMF rail with a stock bolted to it either. It is all integral. It very well could be the same scenario as the SMF / Pro Shot fit I described, but also wouldn't surprise me if it were different. Would have to see one in person.
But the Mag Air isn't just an SMF rail with a stock bolted to it either. It is all integral. It very well could be the same scenario as the SMF / Pro Shot fit I described, but also wouldn't surprise me if it were different. Would have to see one in person.
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: Mag air question
Any idea of what the "length of pull" is on the Mag Air?
Cub *TactZone * Trigger Tech (AKA Cub-Pow)
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
-
- Posts: 610
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Mag air question
I haven't seen that spec listed anywhere. You might have to reach out to Peter. Or wait for someone here to receive theirs and measure for you. But the rear of the stock looks to be the same as all regula micros....so 13.5" LOP would be my guess.
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: Mag air question
That's my thought. I was hoping for something shorter along the lines of my 308 .wheelsquad wrote: ↑Thu Jan 13, 2022 12:42 pmI haven't seen that spec listed anywhere. You might have to reach out to Peter. Or wait for someone here to receive theirs and measure for you. But the rear of the stock looks to be the same as all regula micros....so 13.5" LOP would be my guess.
Cub *TactZone * Trigger Tech (AKA Cub-Pow)
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
- Excalibur Marketing Dude
- Site Admin
- Posts: 695
- Joined: Mon Sep 29, 2003 4:25 pm
Re: Mag air question
I get it, the shorter LOP is nice for shorter people, kids and ladies but to be honest we never sold many of any of the shorter crossbows we made in the past. Each stock needs its own mold and they tend to be pretty pricey so we try to make something that is going to work for the majority of our customers out there.That's my thought. I was hoping for something shorter along the lines of my 308 .
Peter
Re: Mag air question
Maybe time to consider designing an adjustable stock perhaps?? What say you,Peter?Excalibur Marketing Dude wrote: ↑Fri Jan 14, 2022 10:16 amI get it, the shorter LOP is nice for shorter people, kids and ladies but to be honest we never sold many of any of the shorter crossbows we made in the past. Each stock needs its own mold and they tend to be pretty pricey so we try to make something that is going to work for the majority of our customers out there.That's my thought. I was hoping for something shorter along the lines of my 308 .
Peter
Cub *TactZone * Trigger Tech (AKA Cub-Pow)
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
-
- Posts: 4804
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: Mag air question
X2! Like an AR! Could be the stock on all Excalibur’s.Too easy.JUSTANUFF wrote: ↑Fri Jan 14, 2022 12:49 pmMaybe time to consider designing an adjustable stock perhaps?? What say you,Peter?Excalibur Marketing Dude wrote: ↑Fri Jan 14, 2022 10:16 amI get it, the shorter LOP is nice for shorter people, kids and ladies but to be honest we never sold many of any of the shorter crossbows we made in the past. Each stock needs its own mold and they tend to be pretty pricey so we try to make something that is going to work for the majority of our customers out there.That's my thought. I was hoping for something shorter along the lines of my 308 .
Peter
- nchunterkw
- Posts: 2904
- Joined: Sat Dec 24, 2011 11:21 am
- Location: Wake Forest, NC
- Contact:
Re: Mag air question
Would you call it a Koda-calibur?
Keith
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
-
- Posts: 4804
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: Mag air question
I thought I have read on here that stated the pro shot trigger,could be fitted with the pro shot!?longbow joe wrote: ↑Sat Jan 08, 2022 11:40 amBeing a "plastic " frame would this new light weight wonder accept a pro shot trigger???
Excalibur Marketing Dude wrote: ↑Fri Jan 14, 2022 8:09 am
Anyone know the LOP on the Mag!?
The LOP on the MagAir is the same as all the Micro's which is 13.75. And yes, the ProShot trigger can be installed in the new MagAir.
Peter
Cub *TactZone * Trigger Tech (AKA Cub-Pow)
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
-
- Posts: 610
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Mag air question
Seeing the 308 Short Mag special run released today reminded me of this thread and particular comment.... And I can't help but think that the reason the short LOP models never sold well was because those stocks were ALWAYS put on the slowest models. Had they been on mid and higher speed models, I'd have to think they would have sold a lot better.Excalibur Marketing Dude wrote: ↑Fri Jan 14, 2022 10:16 amI get it, the shorter LOP is nice for shorter people, kids and ladies but to be honest we never sold many of any of the shorter crossbows we made in the past. Each stock needs its own mold and they tend to be pretty pricey so we try to make something that is going to work for the majority of our customers out there.That's my thought. I was hoping for something shorter along the lines of my 308 .
Peter
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: Mag air question
I agree wheelsquad!!
Cub *TactZone * Trigger Tech (AKA Cub-Pow)
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string