Help Tight Fit Luminok
Moderator: Excalibur Marketing Dude
-
- Posts: 69
- Joined: Thu Jun 18, 2009 2:49 pm
- Location: Spring, TX
Help Tight Fit Luminok
Having trouble installing luminok - have proper ones as one went in with no problem - any suggestions
-
- Posts: 625
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Help Tight Fit Luminok
https://youtu.be/_P2-jEqqpAU
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
-
- Posts: 625
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Help Tight Fit Luminok
And more instructional videos here: https://lumenok.com/pages/media
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
-
- Posts: 69
- Joined: Thu Jun 18, 2009 2:49 pm
- Location: Spring, TX
Re: Help Tight Fit Luminok
I think some epoxy stayed in shaft from removing old nock - have no idea on how to remove
Re: Help Tight Fit Luminok
Use acetone to soften the old glue and final clean out with a tight fit bore brush back and forth.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
-
- Posts: 69
- Joined: Thu Jun 18, 2009 2:49 pm
- Location: Spring, TX
Re: Help Tight Fit Luminok
cleaned shaft with acetone followed by wire brush (used for guns) -worked perfectly
thanks for help
thanks for help