Deer hides (a bit long)
Moderator: Excalibur Marketing Dude
Deer hides (a bit long)
I was wondering what everyone does with their deer hides? A couple of years ago I started looking into tanning the hides. After a lot of reading and no real ABC instruction, I stumbled upon a product with clear steps on how to tan your deer hide (and other furs). It is serious work, but the result is great. I did 2 last year and 2 this year. I am using them as a hammock cover, but they have endless (?) uses.
We have all seen the “raw” hide
First, clean the muscle tissue, membrane and snew off the inside of the hide. I used a hunting knife almost perpendicular to the hide and stretched it as I cut the “stuff” off. This is the hardest part and takes a couple of hours. I have cut the hide more often than I care to say. If anyone knows how to do this properly, please let me know.
Next, lay the hide on a flat surface and coat it with about ¼ inch of salt, noniodized is requested (I don’t know why).
Leave it a day then clean it off. And I rinse mine. Let it dry so it feels like a wet chamois.
Here is the product I found. I bought it at the Leather factory in Mississauga (Ontario). I believe they are associated with the Leather Factory in the US.
It feels like shampoo. Apply a generous coat, and try not to let it puddle
It takes about a week for the hide to dry. This seems to be determined by the temperature of the room.
The hide will be quite stiff at this stage. I brush the suede side with a wire brush
Then I buff it on this to make it pliable
This is the final product...
We have all seen the “raw” hide
First, clean the muscle tissue, membrane and snew off the inside of the hide. I used a hunting knife almost perpendicular to the hide and stretched it as I cut the “stuff” off. This is the hardest part and takes a couple of hours. I have cut the hide more often than I care to say. If anyone knows how to do this properly, please let me know.
Next, lay the hide on a flat surface and coat it with about ¼ inch of salt, noniodized is requested (I don’t know why).
Leave it a day then clean it off. And I rinse mine. Let it dry so it feels like a wet chamois.
Here is the product I found. I bought it at the Leather factory in Mississauga (Ontario). I believe they are associated with the Leather Factory in the US.
It feels like shampoo. Apply a generous coat, and try not to let it puddle
It takes about a week for the hide to dry. This seems to be determined by the temperature of the room.
The hide will be quite stiff at this stage. I brush the suede side with a wire brush
Then I buff it on this to make it pliable
This is the final product...
Last edited by Allan on Fri Jan 11, 2008 7:16 pm, edited 2 times in total.
I bought a book from Chapters called 'Deerhides into Buckskins: How to tan with brains, soap or eggs' by Matt Richards ($15.00).
For years I've wanted to try it, but never found a good set of instructions until this book. It sounds like a lot of work, but the book gives simple yet detailed steps. Well worth the price as it will save you lots of mistakes. This is for hair off buckskin, like leather but as soft and pliable as a towel. Maybe I'll try it some day.
As for the tannery NewGuy, where is it? I'd consider using it too.
For years I've wanted to try it, but never found a good set of instructions until this book. It sounds like a lot of work, but the book gives simple yet detailed steps. Well worth the price as it will save you lots of mistakes. This is for hair off buckskin, like leather but as soft and pliable as a towel. Maybe I'll try it some day.
As for the tannery NewGuy, where is it? I'd consider using it too.
Deer hides
Alllan
How have the hides stood up to the use? I understood that deer hides with hair on were not durable for use as a cover etc. as the hair in a year or so became brittle and began to break off. Thus, it was a mess to keep clean with all the deer hair. It was just the same as having dog and cat hair all over everything .Consequently, I abandoned the whole idea of tanning with hair on.
bbbwb
How have the hides stood up to the use? I understood that deer hides with hair on were not durable for use as a cover etc. as the hair in a year or so became brittle and began to break off. Thus, it was a mess to keep clean with all the deer hair. It was just the same as having dog and cat hair all over everything .Consequently, I abandoned the whole idea of tanning with hair on.
bbbwb
Been doing the hat for hide thing up till now. Probably going to pay someone to tan one for me for the house display idea. Be careful what type of tanning solutions you use and how you use them. There are some that are seriously bad for your health.
rutman
paradox
graphite goldtip laser II's
wasp 100gr. jakhammer sst expandibles
Love it all!!!!!!!!!
paradox
graphite goldtip laser II's
wasp 100gr. jakhammer sst expandibles
Love it all!!!!!!!!!
I have a hide with hair on that's been used on the floor for photos (sitting, standing on) been moved from place to place, mostly been hanging on a wall though. I haven't noticed much change in the hair and it's from the early 80's. I just run the vacuum nozzle over it a couple of times a year. It's still in really good shape. I also have beaver pelts on felt hanging up - they're from my parents and I don't know how old they are - no problem there either.
I had mine done at a shop. Have wanted to try it myself... but... time and space are at a premium here these days. We donate ours to Hats for Hides now.
I had mine done at a shop. Have wanted to try it myself... but... time and space are at a premium here these days. We donate ours to Hats for Hides now.
________________
Sent from a mobile device - So spelling and grammar may be questionable!
---
"Team DryFire"
Vixen, Micro 315, HHA Optimizer, Boo & VixenMaster strings, Munch Mounts, Dr. Stirrup accessories.
Sent from a mobile device - So spelling and grammar may be questionable!
---
"Team DryFire"
Vixen, Micro 315, HHA Optimizer, Boo & VixenMaster strings, Munch Mounts, Dr. Stirrup accessories.
The price of getting it done at a tannery has kept me from having one done. The bottle of TANNIT was about $36, and it does 2 full sized deer hides.
BBBW- the hair on deer hides does not bend well, it breaks, thus leaving hairs everywhere. My wife complains about the hair that I drag in the house, but the hammock is outside so it isn't too bad. I have heard that the hide will become "bald" as the hair wears off. Still, I like the idea of using all the animal, and I still might attempt to make a pair of winter pants (coveralls), fur side in.
BBBW- the hair on deer hides does not bend well, it breaks, thus leaving hairs everywhere. My wife complains about the hair that I drag in the house, but the hammock is outside so it isn't too bad. I have heard that the hide will become "bald" as the hair wears off. Still, I like the idea of using all the animal, and I still might attempt to make a pair of winter pants (coveralls), fur side in.
Deer hides
Allan:
Thanks for the response. To use outside will help to reduce the problem. The hide should be warm and comfy though. Your comment about the "Tannit" being sufficient to do 2 hides though is worhtwhile knowing. I have made "rawhide' for snowshoe repairs etc. and this is without hair. I am wondering if removing hair and then use "Tannit" would give a useable pliable hide.
Any thoughts?
bbbwb
Thanks for the response. To use outside will help to reduce the problem. The hide should be warm and comfy though. Your comment about the "Tannit" being sufficient to do 2 hides though is worhtwhile knowing. I have made "rawhide' for snowshoe repairs etc. and this is without hair. I am wondering if removing hair and then use "Tannit" would give a useable pliable hide.
Any thoughts?
bbbwb