got my exomax!!!

wim · Post by **wim** » Sat Feb 09, 2008 12:25 pm

last week ik have picked up my exomax at the customs office, after 3 hours of waiting i finally went home with 3 boxes of crossbow gear, including my exomax.
have been shooting today for the first time, what can i say......
i love it,i'm also very happy with my rinehart 18-1 targetblock (only lost one insert with targetpoint, still in the block).
do you guy's glue the inserts yourself? because i used the arrowpuller from excalibur and pull the insert out, then i used the saunders arrowpuller and then the insert with point where still in the targetblock.
i still have to install my v-bar system, but with the boo string catwiskers it is already very quit, i think.
so do you guy's have any tips for me about sighting in the scope?
another very happy excalibur owner is borne today.

ecoaster · Post by **ecoaster** » Sat Feb 09, 2008 1:50 pm

These bows are the top of the line for sure. It will give you many years of enjoyment!

Esox · Post by **Esox** » Sat Feb 09, 2008 3:57 pm

Welcome to the Family.... You'll have a lot of questions and this Forum is the best place to find your answers.....

I would also suggest the following website for a wealth of information on equipment, testing and tuning your crossbow. He has done a tremendous amount of work on all facets of crossbow shooting....

http://cacciaebalestra.altervista.org/I ... Main0.html

You're already set up well for some great shooting, so you are well on your way.... I think you'll be happy with your choice for years to come...

Again Welcome aboard!.....

dick195252 · Post by **dick195252** » Sun Feb 10, 2008 8:59 am

Congratulations on a Great Bow, Wecome aboard

Just ask the questions on this site and everyone will be more than happy to help you out... I sighted my scope in just like the Instruction Manual said with no problems. just make sure you do not aim at the same point once its sighted in our you will be tearing up Bolts big time

my target has 5 Bullseyes on it i am at a different one each time to save my Bolts

Pydpiper · Post by **Pydpiper** » Mon Feb 11, 2008 7:48 am

I glue in all my own inserts and nocks, I use the archery super glue, works well and I have not lost an insert since. A bit of a trick to get them out when you want them out, but it can be done. The arrow remover from Excal has great uses, but pulling arrows isn't one of them.
Here is a link to help with that scope:
http://www.excaliburcrossbow.com/phpBB2 ... black+line
Congrats on the new bow wim, you be careful over there in Holland with that thing, don't shoot any dikes! Matter of fact, ship them over here.

saxman · Post by **saxman** » Mon Feb 11, 2008 8:05 am

Pydpiper wrote:I glue in all my own inserts and nocks, I use the archery super glue, works well and I have not lost an insert since. A bit of a trick to get them out when you want them out, but it can be done. The arrow remover from Excal has great uses, but pulling arrows isn't one of them.
Here is a link to help with that scope:
http://www.excaliburcrossbow.com/phpBB2 ... black+line
Congrats on the new bow wim, you be careful over there in Holland with that thing, don't shoot any dikes! Matter of fact, ship them over here.

You beat me to it Pydpiper.
This is who I was going to tell you to contact about sighting in your scope.It worked for me.
Welcome friend.Remember to keep those fingers clear.