This is slicker than a gravy sandwich
After the water was heated it took 5 minuets to strip and fletch 6 arrows.
All they had was the quick spins.
I shot one of them within seconds of pulling it out of the water,no problem.
Scott
http://www.myspace.com/saxman1
Take a kid hunting
They don't remember their best day of watching TV
Excalibur Equinox
TruGlo Red/Green Dot
NGSS Absorber by NewGuy
Custom strings by BOO
Groundpounder Top Mount
ACF Member - 2011
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
I've used them on a set I made up this fall.... They are quick and easy and expensive, but the results are sweet.. Only I couldn't get any offset on the vanes... But the arrows flew great anyway...
I used build arrows by hand, cleaning, dipping, drying, fletching and all, but this really makes it almost idiot proof and a heck of a lot easier....
You did a fine job...Always is fun to be a little personal with the toys.....
I've used them on a set I made up this fall.... They are quick and easy and expensive, but the results are sweet.. Only I couldn't get any offset on the vanes... But the arrows flew great anyway...
I used build arrows by hand, cleaning, dipping, drying, fletching and all, but this really makes it almost idiot proof and a heck of a lot easier....
You did a fine job...Always is fun to be a little personal with the toys.....
Mine came with a DVD and it says if you do it quickly you can twist the thing for a helical.
I paid $12.95 for the kit of 6.
Scott
http://www.myspace.com/saxman1
Take a kid hunting
They don't remember their best day of watching TV
Excalibur Equinox
TruGlo Red/Green Dot
NGSS Absorber by NewGuy
Custom strings by BOO
Groundpounder Top Mount
ACF Member - 2011
Yeah, I got the same one, but I'm too much of spaz to do it right..and didn't want to take a chance on messing them up.. Plus if I rememeber right I paid a lot more for them the that, but eitherway, I guess if you figure in paints, cleaners and especially time they pretty much cost the same as the hand made arrows.... plus it's just too easy... I mean it's over and done in "seconds" not hours or days....
I do have another box to make up some more arrows, so maybe this time I'll try making an offset...... Hey, how bad can I mess up???....
Cabelas has them... I'm sure every major mailorder shop has them...and probably the archery retail stores too....Check the websites if you can't find them locally.. Remember though, they come in a variety of sizes, colors and shapes so look all of them over before buying....
I wasn't sure if they would work, do you think I would be good to get them for my Gold Tip Laser II? I am shooting an ExoMax. Also, whats the best way to strip the original fletching.
There's no special preparation needed. Just do them like you would when you're going to use a fletching jig... There's a DVD that comes with the package and it shows everything on how to make them up.... It's very Low-Tech to say the least... Actually the video tells you to just scrap the shaft with a knife and maybe rough it up with some sandpaper if you want, but that's not needed and it's nothing special... Works on carbon or aluminum. shafts...
Esox wrote:There's no special preparation needed. Just do them like you would when you're going to use a fletching jig... There's a DVD that comes with the package and it shows everything on how to make them up.... It's very Low-Tech to say the least... Actually the video tells you to just scrap the shaft with a knife and maybe rough it up with some sandpaper if you want, but that's not needed and it's nothing special... Works on carbon or aluminum. shafts...
I tell ya, It is amazing...
On the DVD it's so lo tech he dipped it in water that was in a turkey fryer and it still had turkey fat in it.
Scott
http://www.myspace.com/saxman1
Take a kid hunting
They don't remember their best day of watching TV
Excalibur Equinox
TruGlo Red/Green Dot
NGSS Absorber by NewGuy
Custom strings by BOO
Groundpounder Top Mount
ACF Member - 2011
Quote: I wasn't sure if they would work, do you think I would be good to get them for my Gold Tip Laser II? I am shooting an ExoMax. Also, whats the best way to strip the original fletching.
They'll work on the GTs. I shot mine so fletched trough an Equinox. Easy and slick tho it adds about 25 grns to the back.