HELP!!!

[munch]

here is a link to show an impact drver
http://www.toolnet.co.za/images/47641.jpg
and here is a how to
http://www.ehow.com/how_4809810_use-han ... river.html

[CDN Taxman]

Dumb question, but you've removed those disapator pads, right?

Mike

[Arrow1]

Dumb question, but you've removed those disapator pads, right?

Mike

No.But im not sure how that would help?

[bdog]

if the pads are left on with the string off,then the limbs are squishing the pads with the possibility to damage the rubber pads....

[Arrow1]

String is still on.I was just rying to take the front assembly off so i could resserve my bowstring.

[Boo]

You are trying to remove the riser from the rail! Just insert the allen and use anything as an extension. Just use a stringing aid to remove the string and make yourself a jig to hold the string.
http://i28.photobucket.com/albums/c220/ ... G_0940.jpg
Meantime get an impact driver (like munch was describing) and an allen socket to remove those bolts.

[Crispy]

Try sliding a small diameter pipe over the allen wrench for more leverage.