Anyone have any pointers on setting up the S5 on a max with the groundpounder mount on it.
Does the S5 still mount on top? and then the ground pounder on top of that?
Just got the S5 in and started looking at it.
Any thoughts or pictures of that setup?
What is the best clearance to have between the string FFF and the bumpers?
S5 setup with ground pounder
Moderator: Excalibur Marketing Dude
-
- Posts: 32
- Joined: Fri Jul 30, 2010 10:33 pm
- Location: NC
- Limbs and Sticks
- Posts: 3206
- Joined: Mon Sep 01, 2008 7:13 pm
- Location: Colonial Beach, Virginia, US
Re: S5 setup with ground pounder
Send Todd a pm[ ground pounder] I think he modified some bolts for this, I may be wrong it won't hurt to ask him.
Wes
Wes
"Maxine"
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
1.75x5 Burris scope
Boo string
STS
Feathered easton 2020's
Magnus stingers
Re: S5 setup with ground pounder
if you don't have any luck watch this video link
http://www.youtube.com/watch?v=WMtD4A5g ... ature=plcp
http://www.youtube.com/watch?v=WMtD4A5g ... ature=plcp
PUT IT IN THE BAG MARLIN ( #$%^ you it"ll bite)
BAD NEWS TRAVELS FAST
[email protected]
munchmounts channel utube
munchmounts facebook
BAD NEWS TRAVELS FAST
[email protected]
munchmounts channel utube
munchmounts facebook
Re: S5 setup with ground pounder
Here is a picture of my Vortex with Munch Mount and S5. Easy set up. Munch has the proper screws, etc.
Wildlife Population Control Specialist
-
- Posts: 32
- Joined: Fri Jul 30, 2010 10:33 pm
- Location: NC
Re: S5 setup with ground pounder
OK I found the longer bolts, I think they came with the ground pounder.
I did not have the washers that are needed to fit the tube to the S5. The top of the S5 is rounded and the tubes flat.
Can they be had at a local hardware store or someplace. Anyone Know?
Thanks.
I did not have the washers that are needed to fit the tube to the S5. The top of the S5 is rounded and the tubes flat.
Can they be had at a local hardware store or someplace. Anyone Know?
Thanks.
Re: S5 setup with ground pounder
you may find them at a hardware store but it took me 3 weeks to find them in England and wanted to sell me minimum of 5000 pieces .i use shorter posts as well and only 5/8" so they are less weightMR. GADGET wrote:OK I found the longer bolts, I think they came with the ground pounder.
I did not have the washers that are needed to fit the tube to the S5. The top of the S5 is rounded and the tubes flat.
Can they be had at a local hardware store or someplace. Anyone Know?
Thanks.
PUT IT IN THE BAG MARLIN ( #$%^ you it"ll bite)
BAD NEWS TRAVELS FAST
[email protected]
munchmounts channel utube
munchmounts facebook
BAD NEWS TRAVELS FAST
[email protected]
munchmounts channel utube
munchmounts facebook
-
- Posts: 32
- Joined: Fri Jul 30, 2010 10:33 pm
- Location: NC
Re: S5 setup with ground pounder
You sell just the posts and washers? No need for another full mount.
If so PM or email me info on them please.
If so PM or email me info on them please.
Re: S5 setup with ground pounder
Pretty sure they are called saddle washers. I would think most hardware type stores would have them.MR. GADGET wrote:OK I found the longer bolts, I think they came with the ground pounder.
I did not have the washers that are needed to fit the tube to the S5. The top of the S5 is rounded and the tubes flat.
Can they be had at a local hardware store or someplace. Anyone Know?
Thanks.
Wildlife Population Control Specialist
-
- Posts: 1280
- Joined: Thu Oct 12, 2006 3:15 pm
- Location: Monroe, Georgia
Re: S5 setup with ground pounder
I stopped making my mount just before Excalibur came out with the S5 dampening system. The longer bolts that I sent you with your mount worked with the STS dampening system. Munch has a solution to the S5 mount with using a moon shaped saddle washer. You might be able to find them at a hardware store or make your own.
Why ride when you can walk!