Exhausting Day with Equinox
Moderator: Excalibur Marketing Dude
Exhausting Day with Equinox
After switching over to blazer vanes, I took them out for their first trial run. That's where the trouble started.Set up at 20 yds and shot my first bolt. 4 inches right. 2nd and 3rd bolt produced same result. After making scope adjustments the next group was 4 inches left. I was sure that I did not over correct so I shot another group. One was dead center, one 4 inches left, and one 4 inches right. Was beginning to think the new blazers were crap. Got out my other 6 GT bolts that had 4 inch duravanes. The first 2 were right on the money but the other 4 were all over the target. At this point I realized that something had to be wrong. A thorough inspection revealed my problem. The bottom screws on my hawke scope mount were loose. The scope was moving left and right with each shot. Had to take scope off the rail to get access to the loose screws. Re-tightened with loctite and returned to the bench. The 2nd go round produced much better results. 1st group was 3 inches right so I made scope adjustment and the next group was on the money. Had a few other issues but managed to deal with them without too much trouble. My brace height kept changing after every couple of shots. I do have a new string that only had about 15 shots on it. I left the bow cocked for 3 days after putting the new string on the bow.After today's 50 shots it seems to be getting better but I have noticed some serving wear on the right side where the claw holds the serving. It ate my first string in the same spot. May need to send my bow to Danny for some kind of claw repair. Only other issue I had was a damaged bolt. Have no idea what happened but one of my blazer vanes was totally ripped off the bolt. The bolt missed the target completely. Found the bolt 50 yds down range embedded in an oak tree. When i removed it from the tree, the brass insert was still buried in the tree. Not sure what tore the vane off but it may have been the arm that holds the bolt to the rail. After all was said and done, I think the blazers are keepers. My final group was pretty good. Guess I will strip and re-fletch my other bolts.
2015 Matrix 380 Blackout (The Black Pearl)
Zombie Slayers
Muzzy Trocar-Bad to the Bone
Boo String
Zombie Slayers
Muzzy Trocar-Bad to the Bone
Boo String
- Doe Master
- Site Admin
- Posts: 4745
- Joined: Sun Jun 25, 2006 7:57 am
- Location: Baden , Ontario
Re: Exhausting Day with Equinox
Yup anything loose can cause so much grief .
Good shots now though .
Good shots now though .
Prone est ut nos es plurimus periculosus
-
- Posts: 1387
- Joined: Sun Apr 15, 2012 10:58 pm
- Location: Bloomfield Missouri
Re: Exhausting Day with Equinox
Hey upsman. You got to have a bad day now & then so you know when your having a good one. Least u found the problem. Better luck next time
Micro 335 Camo. Micro Nightmare. Vixen Matrix 310 Axiom
Leupold scopes VixenMaster Strings
Big john arrows. BOO strings & things
Montec g5
DaGriz knive
Less work.....more hunt
Derry Hicks
Excalibur only
Leupold scopes VixenMaster Strings
Big john arrows. BOO strings & things
Montec g5
DaGriz knive
Less work.....more hunt
Derry Hicks
Excalibur only
Re: Exhausting Day with Equinox
Glad you found the problem! and congrats on last shots in the target!!
vixen 11
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
exocet 175 with Aging custom stock #27
Exocet 175
exocet 200
matrix 355
Micro Camo 335
Micro Nightmare 335
380 Lynx
BJ custom arrows
Boo string on vixen
Re: Exhausting Day with Equinox
glad you got it straitened out and they look like there shooting good! many a day like that for me !
-
- Posts: 2430
- Joined: Sun Dec 18, 2011 6:23 pm
- Location: North Carolina
Re: Exhausting Day with Equinox
Sometimes we have days when nothing seems to go right. I'm glad it wasn't a scope issue other than some loose screws.
Stryker Katana 360
Black Eagle Zombie Slayers
TruGlo Titanium X Hybrid Broadheads
Black Eagle Zombie Slayers
TruGlo Titanium X Hybrid Broadheads
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: Exhausting Day with Equinox
Glad you things worked out. By chance yer not shootin a FFF string r u ? If'en so i have seen them jump under string like a semi-dryfire & vane is history or wrinkle to death
Re: Exhausting Day with Equinox
Good to hear you got it figured out and she's shootin' the lights out now.
Gun control is like trying to reduce drunk driving by making it tougher for sober people to own cars.
Vortex
Trigger Tech 2.5 Trigger
ShadowZone Scope
S5 with dB Killer Bumpers
Boo String
Big John Zombie Slayers
Rage Broadheads
Vortex
Trigger Tech 2.5 Trigger
ShadowZone Scope
S5 with dB Killer Bumpers
Boo String
Big John Zombie Slayers
Rage Broadheads
Re: Exhausting Day with Equinox
Part of the reason I traded a 225#er for a 200#er..............................
"Eze 18:21"
Re: Exhausting Day with Equinox
Reading the serving wear problems, wrap some very fine emery cloth around a 1/4 dowel and polish the latches, particularly the outside edges.
Vortex, Phoenix, single-shot rifles and handguns.
Incurable tinkerer.
Why hunt? Simple, it's BASIC. Why breath?!
Incurable tinkerer.
Why hunt? Simple, it's BASIC. Why breath?!
Re: Exhausting Day with Equinox
I also shoot the Equinox. One of the better vanes that I have used are the Goat Tuff Optivane 2. They stick super easy and are very durable. I have had plenty of trouble getting the blazer vanes to adhere.
Excalibur Revx
Hawke Xb 30 pro
16.5 inch wyverncreations.com zombie slayers
SWAT juggernaut broadhead
Hawke Xb 30 pro
16.5 inch wyverncreations.com zombie slayers
SWAT juggernaut broadhead
-
- Posts: 132
- Joined: Tue Jul 21, 2009 1:32 pm
- Location: little house on the praire S. MN.
Re: Exhausting Day with Equinox
One of the better vanes that I have used are the Goat Tuff Optivane 2
What glue do you use?
What glue do you use?
mark 10 :13
Re: Exhausting Day with Equinox
using the bohning platinum fletch tite.Blood on the floor wrote:One of the better vanes that I have used are the Goat Tuff Optivane 2
What glue do you use?
2015 Matrix 380 Blackout (The Black Pearl)
Zombie Slayers
Muzzy Trocar-Bad to the Bone
Boo String
Zombie Slayers
Muzzy Trocar-Bad to the Bone
Boo String