Redesign of Stringing Aid?
Moderator: Excalibur Marketing Dude
Redesign of Stringing Aid?
.
http://www.excaliburcrossbow.com/catalo ... inging_aid
Does the stringing aid shown in the above copy/paste link have metal inserts on the sides or is just a molding thing?
Trying to figure out if this is similar to my stringing aid or a new, stronger redesign that is a "must have" for my kit.
Thanks,
John
.
http://www.excaliburcrossbow.com/catalo ... inging_aid
Does the stringing aid shown in the above copy/paste link have metal inserts on the sides or is just a molding thing?
Trying to figure out if this is similar to my stringing aid or a new, stronger redesign that is a "must have" for my kit.
Thanks,
John
.
Last edited by JT of PA on Thu Apr 11, 2013 10:14 pm, edited 1 time in total.
Re: Redesign of Stringing Aid?
I don't know but I bet a compeditor will likely have a new one out today the exact same. Just check CN or At later.
Re: Redesign of Stringing Aid?
This is the same string aid I have and it is all plastic no metal of any kind on it.
Phoenix Crossbow
Outdoors and Cars
I'd rather be hunting
Outdoors and Cars
I'd rather be hunting
Re: Redesign of Stringing Aid?
i believe that danny miller has a new improved version of the stringing aid.
Team Dryfire
Re: Redesign of Stringing Aid?
Taz, did you check the link? There are 3 types of store boughts out there, the older blue/black w/ 1" round holes, the new one from Danny Miller [crappy pic below] and the new one from Excal. Both Millers and the new Excal have 'D' holes in them.taz3 wrote:This is the same string aid I have and it is all plastic no metal of any kind on it.
Talked w/ Danny today, he informed me the new Excal has a metal core, fwiw.
"Eze 18:21"
Re: Redesign of Stringing Aid?
Hey folks,
What is the meaning of "fwiw"? I am behind the times with this computer lingo. I probably know it but have forgotten it.
Thanks,
Raymond
What is the meaning of "fwiw"? I am behind the times with this computer lingo. I probably know it but have forgotten it.
Thanks,
Raymond
Re: Redesign of Stringing Aid?
Awshucks,
I appreciate the information from your talk with Danny Miller.
Did he say if the metal encircles the opening the limb tip goes through?
Thanks,
John
I appreciate the information from your talk with Danny Miller.
Did he say if the metal encircles the opening the limb tip goes through?
Thanks,
John
Re: Redesign of Stringing Aid?
It would be pointless if it didn't, imho. The answer is yes he did talk about it.
"Eze 18:21"
Re: Redesign of Stringing Aid?
Thank You ... wanted to make sure. I'll keep an eye out for this new design the as I visit stores in the area. All the best.
Re: Redesign of Stringing Aid?
Just made a set for someone on the forum who needed a stringing aid
glad they went with the flat bottom much easier on the finish of the limbs
IMHO
glad they went with the flat bottom much easier on the finish of the limbs
IMHO
Tenpoint Matrix