What i see for the Micro
Moderator: Excalibur Marketing Dude
What i see for the Micro
Or rather what I would like to see
I was noticing the cheek piece and it looks like its held on by two screws.
That I like. I would like to see it adjustable. Just a matter of removing the bottom lip and slotting those holes maybe?
don't have on in my hand so im guessing here.
Hey Peter!!!! are ya reading
I was noticing the cheek piece and it looks like its held on by two screws.
That I like. I would like to see it adjustable. Just a matter of removing the bottom lip and slotting those holes maybe?
don't have on in my hand so im guessing here.
Hey Peter!!!! are ya reading
Micro RTX
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Re: What i see for the Micro
Don't know about the Micros but on my M330, I didnt use the screw to hold it in place. Just position it to where it fits me best, then snap in place!
Eyeing the M335 stock, looks like same concept applied!
Eyeing the M335 stock, looks like same concept applied!
Micro 335_Black (Leupold Mark AR Mod1 SPR)
Matrix 330_Black (Leupold FXII 2.5x20)
Matrix 355_RealTreeX (TactZone)
Mathews ZXT_Black (SpotHogg Hunter)
Summit Viper SD
Matrix 330_Black (Leupold FXII 2.5x20)
Matrix 355_RealTreeX (TactZone)
Mathews ZXT_Black (SpotHogg Hunter)
Summit Viper SD
Re: What i see for the Micro
not that simple Stan. they are countersunk screw pockets and posts on the cheeck piece that hold it in place. Also a no go not using the screws it doesn't snap on like the other bows. ill post pics later.strum wrote:Or rather what I would like to see
I was noticing the cheek piece and it looks like its held on by two screws.
That I like. I would like to see it adjustable. Just a matter of removing the bottom lip and slotting those holes maybe?
don't have on in my hand so im guessing here.
Hey Peter!!!! are ya reading
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
-
- Posts: 4807
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: What i see for the Micro
Hey Stan, a little silicone caulk and you can put the cheek piece anywhere you want! A little bondo and it can be as tall as you want.strum wrote:Or rather what I would like to see
I was noticing the cheek piece and it looks like its held on by two screws.
That I like. I would like to see it adjustable. Just a matter of removing the bottom lip and slotting those holes maybe?
don't have on in my hand so im guessing here.
Hey Peter!!!! are ya reading
Re: What i see for the Micro
I think that would be a good line for a country love song..flightattendant100 wrote:Hey Stan, a little silicone caulk and you can put the cheek piece anywhere you want! A little bondo and it can be as tall as you want.strum wrote:Or rather what I would like to see
I was noticing the cheek piece and it looks like its held on by two screws.
That I like. I would like to see it adjustable. Just a matter of removing the bottom lip and slotting those holes maybe?
don't have on in my hand so im guessing here.
Hey Peter!!!! are ya reading
"What did I do before duct tape, silicone, drywall screws and youuuuuu"
Micro RTX
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Re: What i see for the Micro
I'm working on an adjustable cheek piece for my M355...stay tuned. I want to be looking right downt he pipe when my cheek bone is socked on the cheek piece and the Excal version is too low by about 3/4".
I'm not sure it will work for a Micro...but then again, I wasn't thinking about the Micro when I came up with the design.
I'm not sure it will work for a Micro...but then again, I wasn't thinking about the Micro when I came up with the design.
Drew
2013 Matrix 355 Xtra
TT Single Stage
Nikon Bolt XR
Boo & Xcalibur flemish strings
18" BE Zombie Slayers
VPA 3-blade broadheads
2013 Matrix 355 Xtra
TT Single Stage
Nikon Bolt XR
Boo & Xcalibur flemish strings
18" BE Zombie Slayers
VPA 3-blade broadheads
Re: What i see for the Micro
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Re: What i see for the Micro
Thanks Newbie. Now I see
then I ll go a nother route..
how about a high, med, and low cheekpiece option? like the stock xtender possibly.
I know I know ,,,we are never satified
then I ll go a nother route..
how about a high, med, and low cheekpiece option? like the stock xtender possibly.
I know I know ,,,we are never satified
Micro RTX
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
-
- Posts: 4807
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: What i see for the Micro
BINGO!!! I like a lot of cheek weld and Excals have always seemed low on the cheek piece to mestrum wrote:Thanks Newbie. Now I see
then I ll go a nother route..
how about a high, med, and low cheekpiece option? like the stock xtender possibly.
I know I know ,,,we are never satified
Re: What i see for the Micro
double post ?
Last edited by newbie on Sat Nov 29, 2014 12:16 pm, edited 1 time in total.
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Re: What i see for the Micro
Somewhat ghetto, but black pipe insulation works very well and can be trimmed to fit your exact needs. You can make it match quite well and look decent with some matching camo tape applied carefully to prevent wrinkles with minimal seams.
Cost is about $10 - $15 to buy the materials to ake 12 of them, including two sided tape to attach them.
Cost is about $10 - $15 to buy the materials to ake 12 of them, including two sided tape to attach them.
Re: What i see for the Micro
yeah Ive done that too but never really cared for it. it does work though
Micro RTX
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
Nikon Bolt XR
BEE Arrows
Slick Trick Magnum
Unshot Beta Chrony
John3:16
-
- Posts: 4807
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: What i see for the Micro
Stan, you can build up the existing cheek piece with a little epoxy and some micro-balloons, or add a wood block and a few layers of veneer like this one.
I know with your woodworking skills you can do this easy as pie. If you are going to paint anyway, bondo or epoxy is no big deal. If you wanted to stain or clear finish it would be "some " trickier. Good luck
I know with your woodworking skills you can do this easy as pie. If you are going to paint anyway, bondo or epoxy is no big deal. If you wanted to stain or clear finish it would be "some " trickier. Good luck
Re: What i see for the Micro
I think Excalibur could do themselves a big favor and over 3 different height cheekpieces. This would really help the "fit" of the bows for various people. I wouldn't think it would be hard for them to do.
Excalibur Matrix 330, Micro 335
-
- Posts: 4807
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: What i see for the Micro
It would get to be a lot with all the different camo patterns and three heights in each. I would love it but.....just saying.cspot wrote:I think Excalibur could do themselves a big favor and over 3 different height cheekpieces. This would really help the "fit" of the bows for various people. I wouldn't think it would be hard for them to do.