Can someone help me pick an arrow for my Micro? :)
Moderator: Excalibur Marketing Dude
-
- Posts: 19
- Joined: Wed Nov 12, 2014 2:24 pm
- Location: Troy, MO
Can someone help me pick an arrow for my Micro? :)
I am still undecided on which arrow to go with for my Micro. Mainly I'm undecided if I want to go with a shorter arrow (like 16") to stay in the stirrup, or not worry about that and go 18".
I see some folks using GT Laser 2, Black Eagle Ex., Zombie Slayers, Spynal Tapps...
So many choices!!!!
I see some folks using GT Laser 2, Black Eagle Ex., Zombie Slayers, Spynal Tapps...
So many choices!!!!
- nchunterkw
- Posts: 2906
- Joined: Sat Dec 24, 2011 11:21 am
- Location: Wake Forest, NC
- Contact:
Re: Can someone help me pick an arrow for my Micro? :)
IMO you can't go wrong with the Zombie Slayers. They are about the stiffest ones out there which for me translates to accuracy.
My Micro setup is
16" ZS, 110 brass insert, flat plastic nock or NuFletch Ignitor, 2" helical fletched vanes or feathers.
My Micro setup is
16" ZS, 110 brass insert, flat plastic nock or NuFletch Ignitor, 2" helical fletched vanes or feathers.
Keith
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Stand by the roads and look, and ask for the ancient paths; where the good way is,
and walk in it and find rest for your souls. - Jer 6:16
Micro 335 & 355
deerboyarchery.wixsite.com/trinitystrings
[email protected]
<{{{><
Re: Can someone help me pick an arrow for my Micro? :)
Zombies, I'm at 15". So far, so good.
It’s not the way you rock, it’s the way that you roll!
- StormDragon
- Posts: 526
- Joined: Mon May 12, 2014 2:05 pm
- Location: South Jersey
Re: Can someone help me pick an arrow for my Micro? :)
Clint
Im currently shooting 16 1/2 BEE's out of mine and so far they are flying great out to 20 yards. Havent had the time and/or weather to try and see how they fly further.
Current set up is the same as when I had my 355 except now the arrows are cut down.
16 1/2 BEE's, 110Gr Brass insert, Blazer Vanes, Nufletch Ignitor Nock and 100Gr Field point or Grim Reaper Xbow Razortip Broadhead or Practice Head. Total weight 421Gr
They stick past the stirrup just a smidge
Hope this helps
Im currently shooting 16 1/2 BEE's out of mine and so far they are flying great out to 20 yards. Havent had the time and/or weather to try and see how they fly further.
Current set up is the same as when I had my 355 except now the arrows are cut down.
16 1/2 BEE's, 110Gr Brass insert, Blazer Vanes, Nufletch Ignitor Nock and 100Gr Field point or Grim Reaper Xbow Razortip Broadhead or Practice Head. Total weight 421Gr
They stick past the stirrup just a smidge
Hope this helps
Micro 335 Nightmare: Morning Star
Elite Synergy; Krampus
Elite Synergy; Krampus
-
- Posts: 1387
- Joined: Sun Apr 15, 2012 10:58 pm
- Location: Bloomfield Missouri
Re: Can someone help me pick an arrow for my Micro? :)
Zombies at 15 in brass inserts and 125 gr points shoot good for me
Micro 335 Camo. Micro Nightmare. Vixen Matrix 310 Axiom
Leupold scopes VixenMaster Strings
Big john arrows. BOO strings & things
Montec g5
DaGriz knive
Less work.....more hunt
Derry Hicks
Excalibur only
Leupold scopes VixenMaster Strings
Big john arrows. BOO strings & things
Montec g5
DaGriz knive
Less work.....more hunt
Derry Hicks
Excalibur only
Re: Can someone help me pick an arrow for my Micro? :)
ClintRhodes wrote:I am still undecided on which arrow to go with for my Micro. Mainly I'm undecided if I want to go with a shorter arrow (like 16") to stay in the stirrup, or not worry about that and go 18".
I see some folks using GT Laser 2, Black Eagle Ex., Zombie Slayers, Spynal Tapps...
So many choices!!!!
...yes but so much fun....I think it's the men and women who are sportsmen that are the one's who keep the economy going on this North American continent!
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: Can someone help me pick an arrow for my Micro? :)
So what would you guys recommend for someone shooting nap foc's (170grain head). Would like to shoot say a 15 or 16 inch to cut down on overlap, but have no idea on what insert or nock to use.
-2019 Assassin 420
-2015 Micro 335 RTX
-2013 Vortex
-2015 Micro 335 RTX
-2013 Vortex
Re: Can someone help me pick an arrow for my Micro? :)
Any BEA is a good choice. Being so short at around 16" they will be stiff no matter what you choose. Jerry at south shore has a blowout on the .003" Spynal Tapps. $31 a dozen. thats cheap i just ordered another 2 dozen.
I will be cutting mine down to 16" to keep inside the stirrup.
I will be cutting mine down to 16" to keep inside the stirrup.
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Re: Can someone help me pick an arrow for my Micro? :)
....x2 what what Mike said on stiffness...newbie wrote:Any BEA is a good choice. Being so short at around 16" they will be stiff no matter what you choose. Jerry at south shore has a blowout on the .003" Spynal Tapps. $31 a dozen. thats cheap i just ordered another 2 dozen.
I will be cutting mine down to 16" to keep inside the stirrup.
...thanks Mike good to know...ya see how we keep the economies going...I think I will now have about 5-6 dozen "arras" in my stable....
Anthony
Last edited by amythntr on Thu Feb 12, 2015 10:31 am, edited 1 time in total.
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: Can someone help me pick an arrow for my Micro? :)
15 1/8" zombies with 22 grn aluminum inserts plastic nocks and blazers finish approx 188grns. With FOCs will be around 355grns. add 22 if you use aluminum nocks. Or add 8 if you use 30 grns aluminum inserts. if you want a luminok add 22 grns.Chefrific wrote:So what would you guys recommend for someone shooting nap foc's (170grain head). Would like to shoot say a 15 or 16 inch to cut down on overlap, but have no idea on what insert or nock to use.
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Re: Can someone help me pick an arrow for my Micro? :)
double
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
-
- Posts: 19
- Joined: Wed Nov 12, 2014 2:24 pm
- Location: Troy, MO
Re: Can someone help me pick an arrow for my Micro? :)
wow thanks for all the replies. Starting to sound like the Micro is not picky on arrows....which is a good thing.
I think I'll shoot Jerry at South Shore an email and ask him about those spynal tapps.
I think I'll shoot Jerry at South Shore an email and ask him about those spynal tapps.
Re: Can someone help me pick an arrow for my Micro? :)
They have changed the design of the Tapps and he is blowing out old stock. Too much sorting to get .001s lots just over that he would sell as .003s.
Kandy-a.k.a Raid
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
Midge- a.k.a Micro 335
SSAS Spynal Tapps-Original
100 Grn 2" Shwacker
Boo threads
Don't wreck the fun house!
-
- Posts: 4970
- Joined: Sun Nov 24, 2013 11:32 pm
- Location: Coquitlam, British Columbia
Re: Can someone help me pick an arrow for my Micro? :)
WOW! $31.00/dozen. That's hard to beat. Thanks for the heads up. Great deal.newbie wrote:Any BEA is a good choice. Being so short at around 16" they will be stiff no matter what you choose. Jerry at south shore has a blowout on the .003" Spynal Tapps. $31 a dozen. thats cheap i just ordered another 2 dozen.
I will be cutting mine down to 16" to keep inside the stirrup.
You're only paranoid if everyone isn't out to get you.
Keep your friends close and your enemies closer.
My enemy's friend is also my enemy.
Keep your friends close and your enemies closer.
My enemy's friend is also my enemy.
Re: Can someone help me pick an arrow for my Micro? :)
Clint I have been using 16" BEE's with 110 grain insert and 100 grain heads. I need to do some more testing, but I like what I have seen so far.
Excalibur Matrix 330, Micro 335