Digging out an old Phoenix

Crossbow Hunting

Moderator: Excalibur Marketing Dude

Post Reply
Brainiac
Posts: 61
Joined: Sun Jul 22, 2007 12:26 am
Location: Piedmont NC

Digging out an old Phoenix

Post by Brainiac »

I got an Phoenix in 06-07..due to Heath issues..I've only shot it maybe 10-20 times.. :( ..Is there anythange I need to look for before I try shooting again...?
I had account.but I had to make a new one.. 8)
georgiaboy
Posts: 2856
Joined: Mon Oct 25, 2010 9:02 pm
Location: S.E. Georgia
Contact:

Re: Digging out an old Phoenix

Post by georgiaboy »

I would check the condition of the string...if it's dry & show's signs of fraying i would replace it. Make sure your brace height is good and go have some fun! :D
Welcome back :)
Bulldog m380 blackout
Micro 355
Matrix 350LE
Vixen II
Proud member of the Georgia Meat Hunter's Association
"Shooting tomorrow's trophy's...today"
Pydpiper
Posts: 6148
Joined: Thu Nov 30, 2006 4:56 pm
Location: Woodstock, Brantford'ish, ON
Contact:

Re: Digging out an old Phoenix

Post by Pydpiper »

georgiaboy wrote:I would check the condition of the string...if it's dry & show's signs of fraying i would replace it. Make sure your brace height is good and go have some fun! :D
Welcome back :)
This.
Was it stored string on or off? Not that it really matters.
Start as though it was new, which it is.
If you are not willing to learn, nobody can help you, if you are willing, nobody can stop you.
A bowhunter with a passion for shooting firearms.
WMU 91
Boo string
Brainiac
Posts: 61
Joined: Sun Jul 22, 2007 12:26 am
Location: Piedmont NC

Re: Digging out an old Phoenix

Post by Brainiac »

It was stored with string on.. :?:
vixenmaster
Posts: 13618
Joined: Wed Sep 14, 2005 3:51 pm
Location: Western Ky

Re: Digging out an old Phoenix

Post by vixenmaster »

Put a new string on if'en you have one. If you don't wax yer string well let it soak in fer abit n go shoot it when yer brace ht,. is set right
Half Bubble Off BD360

[email protected] 417-505-9315
User avatar
wabi
Posts: 13443
Joined: Wed Oct 09, 2002 9:21 pm
Location: Ohio

Re: Digging out an old Phoenix

Post by wabi »

I'd check the DB pads, too. :wink:
wabi
Post Reply