Digging out an old Phoenix

Brainiac · Post by **Brainiac** » Sat Feb 21, 2015 5:54 am

I got an Phoenix in 06-07..due to Heath issues..I've only shot it maybe 10-20 times..

..Is there anythange I need to look for before I try shooting again...?
I had account.but I had to make a new one..

georgiaboy · Post by **georgiaboy** » Sat Feb 21, 2015 6:26 am

I would check the condition of the string...if it's dry & show's signs of fraying i would replace it. Make sure your brace height is good and go have some fun!

Welcome back

Pydpiper · Post by **Pydpiper** » Sat Feb 21, 2015 7:10 am

georgiaboy wrote:I would check the condition of the string...if it's dry & show's signs of fraying i would replace it. Make sure your brace height is good and go have some fun!
Welcome back

This.
Was it stored string on or off? Not that it really matters.
Start as though it was new, which it is.

Brainiac · Post by **Brainiac** » Sat Feb 21, 2015 8:05 am

It was stored with string on..

vixenmaster · Post by **vixenmaster** » Sat Feb 21, 2015 9:35 am

Put a new string on if'en you have one. If you don't wax yer string well let it soak in fer abit n go shoot it when yer brace ht,. is set right

wabi · Post by **wabi** » Sat Feb 21, 2015 9:54 am

I'd check the DB pads, too.

Excalibur Crossbow Forum

Digging out an old Phoenix

Digging out an old Phoenix

Re: Digging out an old Phoenix

Re: Digging out an old Phoenix

Re: Digging out an old Phoenix

Re: Digging out an old Phoenix

Re: Digging out an old Phoenix