Blazer vanes
Moderator: Excalibur Marketing Dude
-
- Posts: 4
- Joined: Thu Jul 30, 2015 11:21 pm
- Location: Crossville, TN
Blazer vanes
I have a new Micro 335..this thing shoots amazing. While in the tree stand this past Saturday, I noticed that there can't be that much clearance when the blazer vane passes the foot stirrup. How close is it? If anyone knows.
Re: Blazer vanes
Unscrew the Broadhead, or point and stick the arrow in backwards until the vane is right over the stirrup. ![Wink :wink:](./images/smilies/icon_wink.gif)
![Wink :wink:](./images/smilies/icon_wink.gif)
It’s not the way you rock, it’s the way that you roll!
Re: Blazer vanes
....brilliance my dear Watson...simply brillance!xcaliber wrote:Unscrew the Broadhead, or point and stick the arrow in backwards until the vane is right over the stirrup.
Anthony
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
![Very Happy :D](./images/smilies/icon_biggrin.gif)
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
-
- Posts: 4
- Joined: Thu Jul 30, 2015 11:21 pm
- Location: Crossville, TN
Re: Blazer vanes
Thanks...never even thought about that!!xcaliber wrote:Unscrew the Broadhead, or point and stick the arrow in backwards until the vane is right over the stirrup.
![Embarassed :oops:](./images/smilies/icon_redface.gif)
Re: Blazer vanes
About .12 inches clearance on my helical vanes. The clearance from shaft to stirrup appears to be around .67 inches.
DuckHunt
DuckHunt
Micro Wolverine/Matrix 350 SE
Recovering Excalaholic![Laughing :lol:](./images/smilies/icon_lol.gif)
Recovering Excalaholic
![Laughing :lol:](./images/smilies/icon_lol.gif)