Blazer vanes
Moderator: Excalibur Marketing Dude
-
- Posts: 4
- Joined: Thu Jul 30, 2015 11:21 pm
- Location: Crossville, TN
Blazer vanes
I have a new Micro 335..this thing shoots amazing. While in the tree stand this past Saturday, I noticed that there can't be that much clearance when the blazer vane passes the foot stirrup. How close is it? If anyone knows.
Re: Blazer vanes
Unscrew the Broadhead, or point and stick the arrow in backwards until the vane is right over the stirrup.
It’s not the way you rock, it’s the way that you roll!
Re: Blazer vanes
....brilliance my dear Watson...simply brillance!xcaliber wrote:Unscrew the Broadhead, or point and stick the arrow in backwards until the vane is right over the stirrup.
Anthony
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
-
- Posts: 4
- Joined: Thu Jul 30, 2015 11:21 pm
- Location: Crossville, TN
Re: Blazer vanes
Thanks...never even thought about that!!xcaliber wrote:Unscrew the Broadhead, or point and stick the arrow in backwards until the vane is right over the stirrup.
Re: Blazer vanes
About .12 inches clearance on my helical vanes. The clearance from shaft to stirrup appears to be around .67 inches.
DuckHunt
DuckHunt
Micro Wolverine/Matrix 350 SE
Recovering Excalaholic
Recovering Excalaholic