ProShot ACP Dissapointment!!! Corrected!!!
Moderator: Excalibur Marketing Dude
ProShot ACP Dissapointment!!! Corrected!!!
After much reading and asking for input on custom triggers, I decided to buy the ProShot. Well, after not very many shots I noticed grooves and fraying of my serving. This string has been a super string from DeerBoy Archery and has been on the bow since last Nov., so I thought I needed to replace it and start over. Installed new string and today shot a half doz. shots and I already have grooves and fraying. the grooves are on both sides and the fraying is on the right Post of the forks. Something this expensive should not be a work in progress. I guess I need advise on polishing the forks. Any help will appreciated. Thx, Dave
Last edited by Shoebuck on Tue Jun 16, 2020 7:11 am, edited 1 time in total.
Micro 335 Camo
Micro 335 Nightmare
Black Eagle Zombies
Spynal Double Tapps
Slick Trick Mag
Wac'em Broadheads
DeerBoy Strings
Xcalibur Strings
8-PtBuck Strings
Nikon Bolt
Micro 335 Nightmare
Black Eagle Zombies
Spynal Double Tapps
Slick Trick Mag
Wac'em Broadheads
DeerBoy Strings
Xcalibur Strings
8-PtBuck Strings
Nikon Bolt
Re: ProShot ACP Dissapointment!!!
Send it back and explain the issue.
EXCALFFLICTION 1991 ->>----------> 2024
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Matrix 355
Huskemaw and Leupold crossbow optics.
Boo Strings
SWAT BH's and TOTA heads.
Teach Your Family How To Hunt So You Don't Have To Hunt For Your Family
Re: ProShot ACP Dissapointment!!!
That's solid advice from Norm, call Excal and they will take care of you. The latches on my TT's gave me fits, latch issues on the ACP are few and far between, but can exist.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: ProShot ACP Dissapointment!!!
Excalibur has your back, send them a message, and git er done!
It’s not the way you rock, it’s the way that you roll!
Re: ProShot ACP Dissapointment!!!
Start an RMA to send the trigger unit back. They do have a solid solution for you. Both my 440 and 360 suffered from the same affliction.
Some people just like stepping on rakes
Re: ProShot ACP Dissapointment!!!
Many thanks to all that replied, great to have so much knowledge and good advise to tap into.
Micro 335 Camo
Micro 335 Nightmare
Black Eagle Zombies
Spynal Double Tapps
Slick Trick Mag
Wac'em Broadheads
DeerBoy Strings
Xcalibur Strings
8-PtBuck Strings
Nikon Bolt
Micro 335 Nightmare
Black Eagle Zombies
Spynal Double Tapps
Slick Trick Mag
Wac'em Broadheads
DeerBoy Strings
Xcalibur Strings
8-PtBuck Strings
Nikon Bolt
Re: ProShot ACP Dissapointment!!!
The only thing better than the Excalibur warranty is the Excalibur forum.
Re: ProShot ACP Dissapointment!!!
Excalibur decides to upgrade their triggers...So why didn't they polish the claws? Mine isn't ?
That has always been a problem for the servings.
That has always been a problem for the servings.
Matrix 405 Mega, Hawke XB30 SR Pro
trigger tech, Dr Stirrup ' Tac Pac
BEE 20" 429gr. NAP spitfires 100gr. Ignitors
BD400 XB30 SR PRO DR. Stirrup.
New 420TD Assassin
trigger tech, Dr Stirrup ' Tac Pac
BEE 20" 429gr. NAP spitfires 100gr. Ignitors
BD400 XB30 SR PRO DR. Stirrup.
New 420TD Assassin
Re: ProShot ACP Dissapointment!!!
Most times the ACP latches do not require polishing due to the method used to manufacture them, compared to the standard trigger. However, if one does slip through the cracks, that's why all the recommendations above are to contact Excalibur, as one doesn't need to polish the new triggers.
Which bow of your has an ACP trigger
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: ProShot ACP Dissapointment!!!
My new Assassin 420TD.janesy wrote: ↑Tue Jun 09, 2020 7:14 amMost times the ACP latches do not require polishing due to the method used to manufacture them, compared to the standard trigger. However, if one does slip through the cracks, that's why all the recommendations above are to contact Excalibur, as one doesn't need to polish the new triggers.
Which bow of your has an ACP trigger
They should be polished after all these years of complaints.
I have 2 Trigger Techs highly polished right from the factory. I thought for once I wouldn't have to replace the trigger again on an Excalibur due to damaged servings.
Matrix 405 Mega, Hawke XB30 SR Pro
trigger tech, Dr Stirrup ' Tac Pac
BEE 20" 429gr. NAP spitfires 100gr. Ignitors
BD400 XB30 SR PRO DR. Stirrup.
New 420TD Assassin
trigger tech, Dr Stirrup ' Tac Pac
BEE 20" 429gr. NAP spitfires 100gr. Ignitors
BD400 XB30 SR PRO DR. Stirrup.
New 420TD Assassin
Re: ProShot ACP Dissapointment!!!
How many shots are you getting from your ACP before your serving is worn? And what exactly is it doing to your serving?
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: ProShot ACP Dissapointment!!!
Triggers were sent back to Excalibur for repair, received them yesterday and they are excellent. Both break better than before, and after 8 to 10 shots each show no serving damage. Huge thumbs up to Peter at Excalibur and the Excalibur Warranty center. Many thanks to all on the forum.
Micro 335 Camo
Micro 335 Nightmare
Black Eagle Zombies
Spynal Double Tapps
Slick Trick Mag
Wac'em Broadheads
DeerBoy Strings
Xcalibur Strings
8-PtBuck Strings
Nikon Bolt
Micro 335 Nightmare
Black Eagle Zombies
Spynal Double Tapps
Slick Trick Mag
Wac'em Broadheads
DeerBoy Strings
Xcalibur Strings
8-PtBuck Strings
Nikon Bolt
Re: ProShot ACP Dissapointment!!!
Were the forks polished?Shoebuck wrote: ↑Tue Jun 16, 2020 7:10 amTriggers were sent back to Excalibur for repair, received them yesterday and they are excellent. Both break better than before, and after 8 to 10 shots each show no serving damage. Huge thumbs up to Peter at Excalibur and the Excalibur Warranty center. Many thanks to all on the forum.
Matrix 405 Mega, Hawke XB30 SR Pro
trigger tech, Dr Stirrup ' Tac Pac
BEE 20" 429gr. NAP spitfires 100gr. Ignitors
BD400 XB30 SR PRO DR. Stirrup.
New 420TD Assassin
trigger tech, Dr Stirrup ' Tac Pac
BEE 20" 429gr. NAP spitfires 100gr. Ignitors
BD400 XB30 SR PRO DR. Stirrup.
New 420TD Assassin
Re: ProShot ACP Dissapointment!!!
Awesome! Glad to hearShoebuck wrote: ↑Tue Jun 16, 2020 7:10 amTriggers were sent back to Excalibur for repair, received them yesterday and they are excellent. Both break better than before, and after 8 to 10 shots each show no serving damage. Huge thumbs up to Peter at Excalibur and the Excalibur Warranty center. Many thanks to all on the forum.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: ProShot ACP Dissapointment!!! Corrected!!!
The forks did not come polished. I did some polishing before I installed trigger. I have now shot 30 plus shots between the two bows and only see a slight cupping in the serving. Both triggers break very crisp with no creep. They did a good job.
Micro 335 Camo
Micro 335 Nightmare
Black Eagle Zombies
Spynal Double Tapps
Slick Trick Mag
Wac'em Broadheads
DeerBoy Strings
Xcalibur Strings
8-PtBuck Strings
Nikon Bolt
Micro 335 Nightmare
Black Eagle Zombies
Spynal Double Tapps
Slick Trick Mag
Wac'em Broadheads
DeerBoy Strings
Xcalibur Strings
8-PtBuck Strings
Nikon Bolt