Axe brace height?
Moderator: Excalibur Marketing Dude
-
- Posts: 373
- Joined: Thu Sep 19, 2013 6:20 pm
- Location: KS
Axe brace height?
So what brace height are ya’ll using on your axe 340 off the factory reds? Thanks!
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: Axe brace height?
I am at 1/8 to 1/2 more 1/2
-
- Posts: 373
- Joined: Thu Sep 19, 2013 6:20 pm
- Location: KS
Re: Axe brace height?
Ok I will try to keep mine set 1/2” too.
Re: Axe brace height?
What does the owners manual say
Re: Axe brace height?
If you have string stops, and I highly recommend that you do, you should be 1/4" off the bumpers relaxed. If using drStirrup stops, I set my string until it's just off the bumpers, then i take out one twist, they are supposed to rest into the bumper a little with those.
It’s not the way you rock, it’s the way that you roll!
-
- Posts: 869
- Joined: Sun Oct 18, 2015 4:29 pm
- Location: Massachusetts
Re: Axe brace height?
owners manual 1/8 to 1/2 with bumpers since axe comes with bumpers 1/2
Re: Axe brace height?
Should be 2-3/4" from the intersection of the bow to the riser which is around 1/4"to 5/16" from the reds
Micro Axe 340 Kryptek Raid
Bushnell Elite 4200 2.5x10x40, HHA Tetra XB
Dr Stirrup Bumpers
BEE'S 400 grains with ignitor lighted nocks
Boo force 10 strings
Bushnell Elite 4200 2.5x10x40, HHA Tetra XB
Dr Stirrup Bumpers
BEE'S 400 grains with ignitor lighted nocks
Boo force 10 strings
Re: Axe brace height?
Yep!xcaliber wrote: ↑Fri Jun 26, 2020 4:17 pmIf you have string stops, and I highly recommend that you do, you should be 1/4" off the bumpers relaxed. If using drStirrup stops, I set my string until it's just off the bumpers, then i take out one twist, they are supposed to rest into the bumper a little with those.
Some people just like stepping on rakes