FASTENER QUERY
Moderator: Excalibur Marketing Dude
FASTENER QUERY
.....are the fasteners on the new AXE 340 AND the A360 which are both micro's the same as the previous micros?
.....contemplating putting titanium on there and don't want to order what I dont need.
.....contemplating putting titanium on there and don't want to order what I dont need.
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: FASTENER QUERY
Anthony
I can tell you that a magnet will stick to the fasteners on an axe which tells me they are not titanium.
I can tell you that a magnet will stick to the fasteners on an axe which tells me they are not titanium.
Hybrid Micro BD 360
Micro Mag 340
Boo Strings - Trinity Strings
Zombie Slayers
Swat & TOTA Broadheads
Micro Mag 340
Boo Strings - Trinity Strings
Zombie Slayers
Swat & TOTA Broadheads
Re: FASTENER QUERY
...that I know...but that is not my question.
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: FASTENER QUERY
Yes they are all the same aside from the riser mounting bolt.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: FASTENER QUERY
...... thanks Chris!
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: FASTENER QUERY
FOLLOW UP QUERY.....anyone know what is the size/type of the bolt which fastens the riser to the frame?
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: FASTENER QUERY
I can check tonight. I've had the specs, but I can't remember.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: FASTENER QUERY
.....thanks Chris
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: FASTENER QUERY
That bolt is a 5/16"-18 X 2.25" .....per Peter!
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: FASTENER QUERY
......just spoke to Noel @ Ti64....they have the bolt that connects the riser to the mainframe. They would be willing to swap out this one bolt for the 2 that connected the original micro riser to the main frame and adjust the price.......
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: FASTENER QUERY
......just spoke to Noel @ Ti64....they have the bolt that connects the AXE340 riser to the mainframe. They would be willing to swap out this one bolt for the 2 that connected the original micro riser to the main frame and adjust the price.......the only issue is the bolt that they have is a half of an inch too long. it will have to be cut.
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: FASTENER QUERY
.....so I just removed one bolt strap fastener from the AXE and tried to replace it with one I had previously bought from Ti64......well it is different.
The one on the AXE DOES NOT have a shoulder on it and the one previously bought for other Micros does.....and the shoulder is too wide hence it is rendered unusable for the AXE....
.....So I think we need to get a complete list of the New Axe fastener nomenclature to insure that if one wants to purchase replacement fasteners they will, in fact, be correct and fit!
The one on the AXE DOES NOT have a shoulder on it and the one previously bought for other Micros does.....and the shoulder is too wide hence it is rendered unusable for the AXE....
.....So I think we need to get a complete list of the New Axe fastener nomenclature to insure that if one wants to purchase replacement fasteners they will, in fact, be correct and fit!
In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: FASTENER QUERY
I replied via PM, but I assume the TI kit was put together before excalibur started using the 1/8" socket cap screw and ferrel spacer.amythntr wrote: ↑Sat Sep 12, 2020 11:45 am.....so I just removed one bolt strap fastener from the AXE and tried to replace it with one I had previously bought from Ti64......well it is different.
The one on the AXE DOES NOT have a shoulder on it and the one previously bought for other Micros does.....and the shoulder is too wide hence it is rendered unusable for the AXE....
.....So I think we need to get a complete list of the New Axe fastener nomenclature to insure that if one wants to purchase replacement fasteners they will, in fact, be correct and fit!
can't remember the thread or pitch off the top of my head.
https://www.excaliburcrossbow.com/phpBB3/viewtopic.php?f=1&t=63120&p=619600&hilit=Spacer+1%2F8#p619600
Last edited by janesy on Sat Sep 12, 2020 1:25 pm, edited 1 time in total.
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: FASTENER QUERY
Otherwise the hardware for the axe aside from the riser bolt is the same as a NON BD micro
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme