Just purchased a C2 Crank Cocking Aid from Danny Miller (a terrific guy) because I hurt my shoulder
trying to cock my Ibex crossbow during last deer season. The crank does not seem to fit on the back of
my Ibex. Is this the right cocking crank for the Ibex?
Thanks,
Silver Bear
Ibex and C2 Crank Cocking Aid
Moderator: Excalibur Marketing Dude
-
- Posts: 9
- Joined: Fri Jun 20, 2014 4:53 pm
- Location: Amherst, NY
-
- Posts: 607
- Joined: Thu Feb 21, 2019 3:23 pm
Re: Ibex and C2 Crank Cocking Aid
A C2 is supposed to fit. Of anyone out there Danny would definitely know what fits. Are you sure you got a C2 and not the original Crankaroo?
Do you just have the plain stock, and not the extender on it?
Do you just have the plain stock, and not the extender on it?
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: Ibex and C2 Crank Cocking Aid
To get it on the butt of the stock you must back off that screw on the crank all the way, then tighten it into the hole in the stock to hold it in place. Check out the video.
https://www.youtube.com/watch?v=TN5n-1o5f28
https://www.youtube.com/watch?v=TN5n-1o5f28
It’s not the way you rock, it’s the way that you roll!
- onebigskittle
- Posts: 2041
- Joined: Tue Sep 21, 2010 1:08 am
- Location: Keysville Virginia
Re: Ibex and C2 Crank Cocking Aid
The C2 works on my Ibex
- AJ01
- Posts: 2489
- Joined: Fri Nov 24, 2017 10:09 am
- Location: Deep in the Heart of the East Texas Piney Woods!
Re: Ibex and C2 Crank Cocking Aid
first of all, make sure the "stock screw" is adjusted all the way out. If it is NOT, it will not attach to the stock.
I has to look like this before mounting.
Hope this helps.
AJ
I has to look like this before mounting.
Hope this helps.
AJ
“Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out and loudly proclaiming "Wow, What a Ride!
-
- Posts: 9
- Joined: Fri Jun 20, 2014 4:53 pm
- Location: Amherst, NY
Re: Ibex and C2 Crank Cocking Aid
Thanks! Good information. Backed the screw all the way into the cocking aid an it fit my Ibex.
Re: Ibex and C2 Crank Cocking Aid
It’s not the way you rock, it’s the way that you roll!