That's why a 340 TD came home with me and sees the most tree stand time. I too believe 340 is the sweet spot for Micros. Though Boo has a point about the limbs on the 400 TD. They're the top of the food chain in my opinion. I'd love to see them on a Micro in the 340-350fps range. You can't go too much beyond that without starting to bring cranks into the conversation. And I prefer the crank to be an option, not a requirement. Put the 400 limbs on a 340-350fps range bow and you'd have a seriously rugged Micro platform. Given the limb thickness, you should be able to shave some draw length off of the package. I don't think you'd have something 308 Short length shooting 340fps, but it may come closer than you think. Hmm, a 340 Short anyone?
340 Short?
Moderator: Excalibur Marketing Dude
340 Short?
To keep from taking the other thread down a rabbit hole...
Micro Wolverine/Matrix 350 SE
Recovering Excalaholic
Recovering Excalaholic
Re: 340 Short?
So have you put the 400 front end on the 340 yet? I know I got Boo to try it on his 360. But I don't remember if you did.DuckHunt wrote: ↑Wed Jul 21, 2021 6:23 pmTo keep from taking the other thread down a rabbit hole...
That's why a 340 TD came home with me and sees the most tree stand time. I too believe 340 is the sweet spot for Micros. Though Boo has a point about the limbs on the 400 TD. They're the top of the food chain in my opinion. I'd love to see them on a Micro in the 340-350fps range. You can't go too much beyond that without starting to bring cranks into the conversation. And I prefer the crank to be an option, not a requirement. Put the 400 limbs on a 340-350fps range bow and you'd have a seriously rugged Micro platform. Given the limb thickness, you should be able to shave some draw length off of the package. I don't think you'd have something 308 Short length shooting 340fps, but it may come closer than you think. Hmm, a 340 Short anyone?
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
-
- Posts: 613
- Joined: Thu Feb 21, 2019 3:23 pm
Re: 340 Short?
I built my dad a 340 Short...
Original Gen 2 (3?) riser from my 308 Short Banshee.
Camo limbs purchased off fb group.
Rail from Matrix 330 cut down to give same power stroke as a 340 micro.
Matrix Sapphire stock to give same LOP as a 308 Short.
Hence, 340 Short
I also picked up another Sapphire stock, my brother might take that to turn his Micro 355 into a 355 Short.
Original Gen 2 (3?) riser from my 308 Short Banshee.
Camo limbs purchased off fb group.
Rail from Matrix 330 cut down to give same power stroke as a 340 micro.
Matrix Sapphire stock to give same LOP as a 308 Short.
Hence, 340 Short
I also picked up another Sapphire stock, my brother might take that to turn his Micro 355 into a 355 Short.
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: 340 Short?
I think it would be a good bow. I'm not sure that 340 would be the idea speed but it would likely be popular at that speed. I'm not seeing much in the way of limb failures so it just might be a super reliable bow.
Some people just like stepping on rakes
-
- Posts: 613
- Joined: Thu Feb 21, 2019 3:23 pm
Re: 340 Short?
I had always figured the various TD front ends could stop. What was that specific end result?janesy wrote: ↑Wed Jul 21, 2021 8:32 pmSo have you put the 400 front end on the 340 yet? I know I got Boo to try it on his 360. But I don't remember if you did.DuckHunt wrote: ↑Wed Jul 21, 2021 6:23 pmTo keep from taking the other thread down a rabbit hole...
That's why a 340 TD came home with me and sees the most tree stand time. I too believe 340 is the sweet spot for Micros. Though Boo has a point about the limbs on the 400 TD. They're the top of the food chain in my opinion. I'd love to see them on a Micro in the 340-350fps range. You can't go too much beyond that without starting to bring cranks into the conversation. And I prefer the crank to be an option, not a requirement. Put the 400 limbs on a 340-350fps range bow and you'd have a seriously rugged Micro platform. Given the limb thickness, you should be able to shave some draw length off of the package. I don't think you'd have something 308 Short length shooting 340fps, but it may come closer than you think. Hmm, a 340 Short anyone?
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
Re: 340 Short?
https://www.excaliburcrossbow.com/phpBB3/viewtopic.php?f=1&t=71686&p=700180&hilit=360+front#p700180
Maybe it wasn't Don and I'm loosing it
Maybe it wasn't Don and I'm loosing it
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
Re: 340 Short?
Hehehe! Maybe this is all a dream to get you to hunting season! I wish that life was like that! Hunt, sleep, hunt!
Some people just like stepping on rakes
- AJ01
- Posts: 2496
- Joined: Fri Nov 24, 2017 10:09 am
- Location: Deep in the Heart of the East Texas Piney Woods!
Re: 340 Short?
I've heard young people have a hard time remembering things....
“Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out and loudly proclaiming "Wow, What a Ride!
Re: 340 Short?
Wow, I must have slept since that experiment. I had my perfect bow all along and didn't even realize it. For some reason, at that time the thought of leaving it that way never crossed my mind. Time to sling some arrows and jog my memory.
Micro Wolverine/Matrix 350 SE
Recovering Excalaholic
Recovering Excalaholic
Re: 340 Short?
Do you remember who told you that?
Blackout BD-Axe "Hatchet340"
Suppressor 400TD
Assassin 400Extreme
Suppressor 400TD
Assassin 400Extreme
-
- Posts: 613
- Joined: Thu Feb 21, 2019 3:23 pm
Re: 340 Short?
Now that's funny right there.
So if your 340TD with the 400TD front end on it is a 365, does that mean a 360TD with a 400TD front end on it will be around a 385?
When I think of "Short" named excal models I think short LOP. I just wish the Assassins weren't the only ones that had adjustable LOP. Or that a short LOP'd bulldog model would be released. Might just have to get my hands on a Stryker bulldog stock some day to put on my BD400. That would cut and plate a lot easier than the Bullpup ready-rest stock it came with.
Last edited by wheelsquad on Fri Jul 23, 2021 12:10 pm, edited 1 time in total.
adapt3Dprints.square.site
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
(Charger EXT blackout covers, Charger handle stow brackets, Cheek Rests)
327 Short Banshee
BD417
Micro/Matrix hybrid Steambow
Franken360
- AJ01
- Posts: 2496
- Joined: Fri Nov 24, 2017 10:09 am
- Location: Deep in the Heart of the East Texas Piney Woods!
Re: 340 Short?
It was either Boo or Norm!!!
“Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside in a cloud of smoke, thoroughly used up, totally worn out and loudly proclaiming "Wow, What a Ride!
Re: 340 Short?
I hope we see a 380 short or suppressor in 2022
Excalibur Revx
Hawke Xb 30 pro
16.5 inch wyverncreations.com zombie slayers
SWAT juggernaut broadhead
Hawke Xb 30 pro
16.5 inch wyverncreations.com zombie slayers
SWAT juggernaut broadhead