Tru Tracers

Moniteaumule · Post by **Moniteaumule** » Wed Jan 04, 2006 8:43 am

Hey Guys,

I was watching the outdoor channel and saw were TRU Tracer is making Noks for crossbow Bolts. Does anyone out there have any information on this?

Thanks,

Moniteaumule

BOB VANDRISH · Post by **BOB VANDRISH** » Wed Jan 04, 2006 2:57 pm

If you do a Google search for "Tracer Nocks",you will get info on several suppliers and an evaluation to read.
The claim is that they are functional in all kinds of light from early morning,mid day to evening.
I have never used them myself ,but they sure look interesting.
The battery life is about 24 hours.
A few of these would more than pay for the few arrows that we have all lost at one time or another!
On some models,you need to install a magnet somewhere along the riser to activate the light as it leaves the bow.
May have to try a few myself!
Bob.

Woody Williams · Post by **Woody Williams** » Wed Jan 04, 2006 3:47 pm

Looks interesting..
http://www.bowhunting.net/artman/publis ... ocks.shtml

http://www.tracerarrow.com/page/page/996884.htm

hawg hunter · Post by **hawg hunter** » Wed Jan 04, 2006 5:07 pm

the gentlemen that produces these nocks lives here in san antonio,tx .i will try to get some more info on them and i know he has some specials running on his website

hawg hunter · Post by **hawg hunter** » Wed Jan 04, 2006 5:38 pm

here is the main mans email and phone wayne simonton @yahoo.com or phone 210 387 3766

BOB VANDRISH · Post by **BOB VANDRISH** » Wed Jan 04, 2006 5:50 pm

Hawg Hunter,do you know if they make them with a flat end on the nock?
I could not tell from the pictures on the site that I found.
Let us know, if you know.
Bob

GaryL · Post by **GaryL** » Wed Jan 04, 2006 9:26 pm

BOB VANDRISH wrote:Hawg Hunter,do you know if they make them with a flat end on the nock?
I could not tell from the pictures on the site that I found.
Let us know, if you know.
Bob

Bob yes he do, 11.99 each go to Woodys link bottom one, flat nock style....

Tar Heel · Post by **Tar Heel** » Fri Jan 06, 2006 11:48 pm

Will either of the tracer nocks for 2216 or 2219 alum arrows fit my gold tip laser II arrows.

Thanks Tar Heel

Hi5 · Post by **Hi5** » Sat Jan 07, 2006 1:29 pm

Tar Heel · Post by **Tar Heel** » Sun Jan 08, 2006 12:59 pm

Tar Heel wrote:Will either of the tracer nocks for 2216 or 2219 alum arrows fit my gold tip laser II arrows.

Thanks Tar Heel

Don't nobody know.

MichiganBill · Post by **MichiganBill** » Sun Jan 08, 2006 2:31 pm

I have used a lighted arrow product from "Archers FLame" and you should be careful. On an older Horton Sportsman (150 lbs) that I have, they work fine and are ariot to watch. On my ExoMax, the nock shoved all the way up the arrow shaft and it was almost like a dryfire. Too risky for me (and yes, I followed the directions).

coyotesniper · Post by **coyotesniper** » Sun Jan 08, 2006 4:45 pm

I was wondering the same thing. I did some searching on the internet, and as best I came up with is
.246 inside dia of aluminum .300 for Goldtip laser II
both are 2219 and outside is the same Maybe this is why they don't work. Don't know for sure

Excalibur Crossbow Forum

Tru Tracers

Tru Tracers

TRACER NOCKS

tracer nock

tracer nocks

tru tracers

Re: tru tracers

Warning