
Loading a Micro
Loading a Micro
Hey all,,,,have not had a chance to go a pull a Micro yet so I thought maybe my curiosty could be answered here,,,,,,,,What is it like to cock with a rope cocker a Micro compared to my 175lb Vixen!!!Ya know my wheels are spinin all the time??? 

Cub *TactZone * Trigger Tech (AKA Cub-Pow)
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
Re: Loading a Micro
It is a bit heavy at the end of the draw cycle, but it is a short stroke, so it's over quickly. It is harder than my 355, and about equal to a Matrix 380 in terms of force, it is not too bad.
It’s not the way you rock, it’s the way that you roll!
Re: Loading a Micro

Cub *TactZone * Trigger Tech (AKA Cub-Pow)
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
Re: Loading a Micro
xcaliber wrote:It is a bit heavy at the end of the draw cycle, but it is a short stroke, so it's over quickly. It is harder than my 355, and about equal to a Matrix 380 in terms of force, it is not too bad.
....I totally agree with what Dan said...however, my description is just as you are getting ready to yell, "Holy S%#T!"



Anthony

In a tough situation and wonder where God is; ...the Teacher is always quiet during the test.
Anthony
A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Anthony

A360 (l'Assassino)
AXE 340
Scorpyd DS (w/AeroCrank AD)
GRZ2
G1-NM335(On loan)
ZS,Ex
Spits
Vixenmaster Strings
Re: Loading a Micro
I just sold a M380 to get the micro I can agree with Anthoney it's more than the 380 but just as you really start to feel it you hear that click
Vortex
Rage 2 blade crossbow
Wyvern quiver mount
Rage 2 blade crossbow
Wyvern quiver mount
Re: Loading a Micro
The most i have shot the Micro in one session was around 30 times, and it started getting a bit hard toward the end. I have gone into the low 100's in one session with the 355, and no real issue near the end. You might want the crank with a back issue already nagging at you. I have a feeling there is going to be a Micro in the 305 FPS range just to address this issue soon. There are many hunters that are very happy hitting 300 FPS with the smaller bow. I see a marketing demand there!
It’s not the way you rock, it’s the way that you roll!
- bob watkins
- Posts: 772
- Joined: Sun Aug 14, 2011 2:03 pm
Re: Loading a Micro
i had that same back surgery dont push your limit . use a crank it will keep you shooting i can cock the mirco with no problem short power strok my 380 i use a crank
Re: Loading a Micro
I would agree with that marketing strategy. My M330 is fine for me. No doubt I could pull a 405 but I tend to like shooting more than a few times when I do go shooting. Used to shoot 70 lb compounds too....now 60 lbs. I would buy a 300 fps micro. Not interested in a 335 fps/270 lb draw weight.xcaliber wrote:The most i have shot the Micro in one session was around 30 times, and it started getting a bit hard toward the end. I have gone into the low 100's in one session with the 355, and no real issue near the end. You might want the crank with a back issue already nagging at you. I have a feeling there is going to be a Micro in the 305 FPS range just to address this issue soon. There are many hunters that are very happy hitting 300 FPS with the smaller bow. I see a marketing demand there!
E/M/MOBUI330 (Finn-esse)
E/M/N335 (Finn-bad)
Click "User Control Panel", "Profile", Location: (you don't have to tell everyone you're "in a van down by the river") but for Pete's sake, what state/prov or country are you in?
E/M/N335 (Finn-bad)
Click "User Control Panel", "Profile", Location: (you don't have to tell everyone you're "in a van down by the river") but for Pete's sake, what state/prov or country are you in?
-
- Posts: 507
- Joined: Wed Sep 01, 2010 2:03 am
- Location: Texas
Re: Loading a Micro
I have been shooting my Micro exclusively since I got it, and I shot both my M380 and Micro today. In my opinion, the short stroke of the Micro is much "easier" to get cocked than the M380.
The more I shoot the Micro the more I like it.
The more I shoot the Micro the more I like it.
Re: Loading a Micro
Lot of good info guys,,,thanks,,,proof will be in the pudding as they say,,,but from what I have heard here,,,i am thinking ,,,M310 may be the direction I'm headed 

Cub *TactZone * Trigger Tech (AKA Cub-Pow)
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string
308 Short Banshee* TactZone * Trigger Tech (AKA Shorty)
Magnus Buzz Cuts * Mad Hornets
Gold Tip Laser II's 16.5 386grn
BE Executioners 16.5 405grn
Miller Top Quiver Mounts
Boo string