Bigredopie Build along
Moderator: Excalibur Marketing Dude
-
- Posts: 4806
- Joined: Thu Jul 30, 2009 5:06 pm
- Location: Ft. Worth, Texas
Re: Bigredopie Build along
Mike do you know an average weight for a blank before you start? Just curious, I bought a blank a while back ( I may get industrious.....right) and it weighs 11 lbs!!!! I know much comes off a blank but this seems really heavy to this newbie.
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
PM sent Paul.flightattendant100 wrote:Mike do you know an average weight for a blank before you start? Just curious, I bought a blank a while back ( I may get industrious.....right) and it weighs 11 lbs!!!! I know much comes off a blank but this seems really heavy to this newbie.
-
- Posts: 13618
- Joined: Wed Sep 14, 2005 3:51 pm
- Location: Western Ky
Re: Bigredopie Build along
Yes sir & that stock is showin some nice curves
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
Need to get the thumbhole and curves taken care of;
And better;
And better;
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
This is where it gets interesting You notice that I started taking off where there was the most wood which is at the rear of the stock. Then I jumped to the safety and moved towards the rear again. NOW I am going to fit the first finger in the pistol grip and then the rest on down. What I am getting at is that its not that you can just do the rear of the stock and then work your way towards the front, but a marriage of first the rail pocket then the rear of the stock and then because the safety is a stationary item, that next and then the pistol grip. After that the grip tells you where the rest will fall into place going back And, all this has to stay in perfect alignment hence the need for the small holes that I drilled dead center in the stock. Its a beautiful thing when it all comes together. Its the reason that I decided to stay poor and chase wood all my life.
-
- Posts: 398
- Joined: Fri Dec 02, 2011 11:37 pm
- Location: MO Bootheel
Re: Bigredopie Build along
Looking good Mike! I can really see her taking shape.
380 Matrix, Vortex, Y25, Exomag and Brown Vixen
Boo Strings & Big John Arrows to hit 'em
DaGriz Knife and Hatchet Set to Skin 'em
Boo Strings & Big John Arrows to hit 'em
DaGriz Knife and Hatchet Set to Skin 'em
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
Slowly fitting the fingers around the grip. Hard part is turning it over and doing it again.
Put a little wave in the trigger guard to make yours just a little different Alan.
Put a little wave in the trigger guard to make yours just a little different Alan.
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
Got both side groovy and now to mate them. Remember that this is all rough yet.
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
Got the grip down to where it feels good;
I am tryin g something different with the bottom wood coming off of the grip. I am making it narrow and then swelling it and then narrow again. Hope that you can see it. Allan, what you think??
I am tryin g something different with the bottom wood coming off of the grip. I am making it narrow and then swelling it and then narrow again. Hope that you can see it. Allan, what you think??
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
Starting to take shape;
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
After discussing the orange comb we decided that it was a bad fit looks wise for the light maple and it is softer than I would have liked so off it goes and on with the dark wenge.
Last edited by agingcrossbower on Tue Aug 26, 2014 6:56 pm, edited 1 time in total.
-
- Posts: 1096
- Joined: Fri Aug 26, 2011 7:28 am
- Location: Northern, Ontario
Re: Bigredopie Build along
Amazing seeing this take shape.
Thanks for sharing
Cheers
Thanks for sharing
Cheers
2011 Exocet 200 lite Package
Fire Bolts
125 gr Rage 2 Blade Cross Bow
Stock Excal String
S5 System
Amazed by this Weapon
DaGriz Knife
Fire Bolts
125 gr Rage 2 Blade Cross Bow
Stock Excal String
S5 System
Amazed by this Weapon
DaGriz Knife
Re: Bigredopie Build along
Yep, great work there!
It’s not the way you rock, it’s the way that you roll!
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
Put the cap on the pistol grip. Normally I drill holes in the grip to lesson the weight but with the Quilted maple I can not change it with the grain going everywhere and anywhere;
-
- Posts: 4791
- Joined: Tue May 19, 2009 8:21 am
- Location: chilton Wi.
Re: Bigredopie Build along
Putting on the butt plate. There is a lot of mass here so I am going to drill some out;
And gorilla glue and clamp;
And gorilla glue and clamp;